Anyone know of a shop in Dallas that will do this? Although I might be able to do it, the plenum spacer seems like a bit of a pain for someone who doesn't work on cars at all...I am also sans torque wrench. Thanks.

 

It's really not that bad pretty easy and I am sure you could find a torque wrench around somewhere.

Any mechanic can do it, just explain the plenum spacer and they will know, give the instructions too. They are going to charge you an hour of labor though. (most shops are about $80) So keep that in mind when you take it in.

 

Post this in the DFW section im sure there are local guys around your area that are willing to help for free, it takes less than 30 min to do this.

https://g35driver.com/forums/dfw-g35-owners-club-136/

 

The spacer install took me awhile but its because i took my time and went really slow. When i did it the second time i did it in about 20 minutes. Buy a torque wrench from harbor freight for less than 20 bucks. A shop will probally charge you 75 to install it. The z tube and pop charger install is even easier.

 

Go to www.myg35mods.com for some very helpful guides with pics on installing those 3 parts (assuming your spacer is the motordyne 5/16" spacer). Just read the guides thoroughly and take your time, they're not as difficult as they seem. Or just ask someone local to help you out, like 05G356MT said.

 

your driveway... and its free