Need pics
Need pics
sup guys, i ordered my wheels in november and they're almost here. after ordering my wheels, i now understand about offsets. i think i ordered the wrong offset wheels for the look i'm trying to accomplish. my wheels are 20X9.5 +22 and 20X10.5 +22. i was trying to go with an aggressive look but didn't know much about offsets. can you guys please post pics of 20X10.5 with +22 offset. also, if i add spacers, will i accomplish a more aggressive look? thanks guys!
All depends on what you consider aggressive.
In my opinion your offsets will give you a pretty clean look without tucking too much (I think that's the standard offset for Volk TE37s in those widths) but it won't be aggressive by most people's standards. With a 9.5 front and 10.5 rear I would say that you need get into the single digit offsets to get an aggressive look.
Spacers will help you get a more aggressive look...15mm or maybe even 20mm will get you there. If you do that then remember you will most definitely need to roll your fenders and maybe run more negative camber. Also, you'll need to slam it because running aggressive wheels without a drop looks goofy.
In my opinion your offsets will give you a pretty clean look without tucking too much (I think that's the standard offset for Volk TE37s in those widths) but it won't be aggressive by most people's standards. With a 9.5 front and 10.5 rear I would say that you need get into the single digit offsets to get an aggressive look.
Spacers will help you get a more aggressive look...15mm or maybe even 20mm will get you there. If you do that then remember you will most definitely need to roll your fenders and maybe run more negative camber. Also, you'll need to slam it because running aggressive wheels without a drop looks goofy.
thanks, i wish i had ordered +4 offset but too late now. my car is pretty low already, all i have to do is do the "spring mount mod". the wheels i ordered was the Work T1S, so yea, i need them to be aggressive as possible, i'm willing to do fender work. do you or anyone on here know if there's a big difference between +4 and +22 (offset) lip size. is it noticable?
yea from +4 to +22 your probably looking at a little under an inch thinner for the lip.
But don't worry, T1s are an incredibly nice looking wheel and with +22 offsets you will have no problem looking clean and fairly flush.
But don't worry, T1s are an incredibly nice looking wheel and with +22 offsets you will have no problem looking clean and fairly flush.
i hope so, but i will be adding spacers. my wheels are the 20" t1s (with step lip)
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
FS[NorEast]: New OEM G35x Compression Rods - Save!!
The Fixer
Steering & Suspension
15
Nov 1, 2015 03:26 PM







