Reflecting on mods this year. What have you done?
#16
#17
#18
okay i'll bite...
this yr on my car:
- Samco intake tube, black(sold ARC pipe)
- Nismo low-temp thermostat
- SxExCx custom grounding kit, red(trashed Stillen kit)
- Custom Saikou Michi Stage 1 oil-catch-can w/sight-tube option(trashed WR can)
- JWT oil pan spacer
- JWT S2 cams w/custom valve buckets, DLC coated
- Fast Intentions resonated cat pipes(burnt out my Kinetix HFCs)
- Custom rear-section true-dual conversion w/3.7" rolled & burned titanium tips added to Stillen Generation 2 dual-path cat-back exhaust
- Transgo VB upgrade
- Stillen transmission cooler kit
- Pi-Thon polished; power steering, coolant, and windshield washer caps
- Titanium dress up bolt kit(gold bolts w/machined washers)
- Custom BC Racing BR coilovers w/Swift springs & VRH front suspension kit by Umbrella Auto Design(put old setup on Wife's car)
- Whiteline Plus urethane front lower inner control arm bushings
- AMS adjustable end-links
- Megan Racing roll center adjusters
- Stillen front strut brace, custom satin black powder-coat(NRG cf brackets didn't clear my BC dampening *****)
- Forged Performance SS brake lines w/Motul RBF 600(Goodridge line burst on me)
- Custom Nismo by Rays Engineering LMGT4(forged monoblock), 2-stage golden bronze powder-coat: 19x8.5 +25 & 19x9.5 +30(sold Forgestar F14's)
- Project Kics R40 Revo, Black w/Red caps(already off)
- Rays extended lugs, Red(now on)
- Custom Sparco Chrono Road racing seats reupholstered to match OEM Willow interior w/Sparco brackets, sliders & hardware
- Recaro Vivo booster seat, midnight desert
- Domo Kun seatbelt shoulder pads
- Custom IGT V2 cf steering wheel
- Works Bell cf Column + Paddle shifter kit
- Custom KJ burned Ti shift **** w/NiftyShifty shift-boot
- 3M Scotchprint 1080 cf vinyl wrapped door pulls(pulled 3M Di-Noc off)
- Custom CBK by JLC quad projector headlights w/haloed "Iron Man" shrouds and 2-tone housing
- LED upgraded my OEM 05-06 reverse lights
- Autotecknic 6pc cf pillar panel covers
- 3M Scotchprint 1080 cf vinyl roof wrap(pulled 3M Di-Noc off)
- PIAA Forza Hybrid Silicone wiper blades
- Custom StrafeDGenius cf front splitter for Nismo Aero w/APR front trim and support rods
- D1 Generation Plus Flush cf hood pins
- Custom fit EuroBoutique IS-F rear "Sharkfin" under-diffuser
my Wife's G this yr:
- APEX'i drop-in panel filter
- OEM G coupe RevUp air-box
- Stillen z-tube
- Custom Magnaflow axle-back plus TopSpeed burned Ti slide tip(pulled previous custom Vibrant axle-back off)
- Stillen sway-bars
- H&R Sport lowering springs w/Tokico "Blues" HP shocks & struts(off my car, switched out her old Eibach ProKit)
- Rays extended lugs, blue
- OEM G coupe/350z Brembo sport brakes(in custom teal)
- Girodisc stage 2 kit: 1pc slotted rotors, SS lines, GD Magic pads and Motul 600 RBF
- CBK dual projector retrofit w/Iron-Man halos
- JDM clear "bump" corners
- OEM Rays Forged 350z v.1 Track wheels: 18x8 +30 & 18x8.5 +33
- Ebay N1 front lip(already gone, someone jacked it)
next yr, a few small projects for my car and possibly some big ones for her car.
this yr on my car:
- Samco intake tube, black(sold ARC pipe)
- Nismo low-temp thermostat
- SxExCx custom grounding kit, red(trashed Stillen kit)
- Custom Saikou Michi Stage 1 oil-catch-can w/sight-tube option(trashed WR can)
- JWT oil pan spacer
- JWT S2 cams w/custom valve buckets, DLC coated
- Fast Intentions resonated cat pipes(burnt out my Kinetix HFCs)
- Custom rear-section true-dual conversion w/3.7" rolled & burned titanium tips added to Stillen Generation 2 dual-path cat-back exhaust
- Transgo VB upgrade
- Stillen transmission cooler kit
- Pi-Thon polished; power steering, coolant, and windshield washer caps
- Titanium dress up bolt kit(gold bolts w/machined washers)
- Custom BC Racing BR coilovers w/Swift springs & VRH front suspension kit by Umbrella Auto Design(put old setup on Wife's car)
- Whiteline Plus urethane front lower inner control arm bushings
- AMS adjustable end-links
- Megan Racing roll center adjusters
- Stillen front strut brace, custom satin black powder-coat(NRG cf brackets didn't clear my BC dampening *****)
- Forged Performance SS brake lines w/Motul RBF 600(Goodridge line burst on me)
- Custom Nismo by Rays Engineering LMGT4(forged monoblock), 2-stage golden bronze powder-coat: 19x8.5 +25 & 19x9.5 +30(sold Forgestar F14's)
- Project Kics R40 Revo, Black w/Red caps(already off)
- Rays extended lugs, Red(now on)
- Custom Sparco Chrono Road racing seats reupholstered to match OEM Willow interior w/Sparco brackets, sliders & hardware
- Recaro Vivo booster seat, midnight desert
- Domo Kun seatbelt shoulder pads
- Custom IGT V2 cf steering wheel
- Works Bell cf Column + Paddle shifter kit
- Custom KJ burned Ti shift **** w/NiftyShifty shift-boot
- 3M Scotchprint 1080 cf vinyl wrapped door pulls(pulled 3M Di-Noc off)
- Custom CBK by JLC quad projector headlights w/haloed "Iron Man" shrouds and 2-tone housing
- LED upgraded my OEM 05-06 reverse lights
- Autotecknic 6pc cf pillar panel covers
- 3M Scotchprint 1080 cf vinyl roof wrap(pulled 3M Di-Noc off)
- PIAA Forza Hybrid Silicone wiper blades
- Custom StrafeDGenius cf front splitter for Nismo Aero w/APR front trim and support rods
- D1 Generation Plus Flush cf hood pins
- Custom fit EuroBoutique IS-F rear "Sharkfin" under-diffuser
my Wife's G this yr:
- APEX'i drop-in panel filter
- OEM G coupe RevUp air-box
- Stillen z-tube
- Custom Magnaflow axle-back plus TopSpeed burned Ti slide tip(pulled previous custom Vibrant axle-back off)
- Stillen sway-bars
- H&R Sport lowering springs w/Tokico "Blues" HP shocks & struts(off my car, switched out her old Eibach ProKit)
- Rays extended lugs, blue
- OEM G coupe/350z Brembo sport brakes(in custom teal)
- Girodisc stage 2 kit: 1pc slotted rotors, SS lines, GD Magic pads and Motul 600 RBF
- CBK dual projector retrofit w/Iron-Man halos
- JDM clear "bump" corners
- OEM Rays Forged 350z v.1 Track wheels: 18x8 +30 & 18x8.5 +33
- Ebay N1 front lip(already gone, someone jacked it)
next yr, a few small projects for my car and possibly some big ones for her car.
Last edited by SDGenius; 11-17-2011 at 02:24 PM.
#19
The following users liked this post:
SDGenius (11-17-2011)
#21
![](https://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/302017_118313811614757_100003084160890_125218_806354562_n.jpg)
![](https://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/319679_112588822187256_100003084160890_102445_1842866901_n.jpg)
![](https://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/308918_102157396563732_100003084160890_17596_1051081824_n.jpg)
Damn you guys have done some serious work on the G's
This year has been an experience for me. Bought the G in May of 2010 but didnt really start modding until this spring.. this is what I did:
Exterior
Dumped N1 style front lip and got the AIT Ings front bumper
Ings side skirts
Chargespeed rear bumper
Flat Iron board spoiler then changed trunk completely and bought Strafe V2 cf trunk
Projector headlights
Painted tails
Went back to OEM grill painted gun metal then eventually flat black
Wheels
Painted calipers black from red
Went from 20 X 8.5 all around Kmc's black and chrome to OEM rays 19's.
Painted Rays gun metal.. sported for a few months then got Falken Koblens.
19X9.5/ 19X10.5 Falken Koblens painted black with bronze lip.. Hated the lip so I painted the lips gun metal. Finally painted them all flat black which def looked the best.
Suspension
Tein 350Z H-techs
Engine/exhaust
Z tube and K&N drop-in
Replaced filter w/JWT pop charger
Motordyne 5/16 copper iso plenum spacer
Berk HFC's
Ark Exhaust
2012 plans:
Getting away from the murdered out look and adding more color!
Axis Rev step lip wheels (polished and gold) or another similar step lip wheel in the less than 2G range .. but def not varrstoen. I was feeling them until I kept researching.
Back to factory headlights painted over the winter by me
Coils
True dual exhaust
Osirus + tune
BBK (last mod will be a stretch)
Of course misc here and there
#22
Had my G for about a month now.
Things I've done so far
Next year's mods:
Nothing comparable to some of these guys
, but its a start.
Things I've done so far
- MD 5/16 copper Iso spacer
- K&N drop in
- 06-07 airbox
- Berk's HFC's
- SxExCx's grounding kit
- JDM RHD battery cover
Next year's mods:
- MD Shockwave TDX2 exhaust
- Nice custom wheels
- Short shifter
- 06-07 tail lights
- Maybe 06-07 headlights (haven't decided yet)
Nothing comparable to some of these guys
![Bowdown](https://g35driver.com/forums/images/smilies/bowdown.gif)
![Embarrassment](https://g35driver.com/forums/images/smilies/redface.gif)
#23
Bought the car in February, spent way too much time here reading, but ended up doing...
MD 5/16ths spacer
Gordon Gee 10-wire kit
Z-tube
275/40/19 rears (does this count?)
20mm Z1 spacers all around
By year end, hoping to do...
Revised 350z spring install
Rear fender roll
Next year...
Sway bars
Clear corners
MD ART pipes + MD XYZ with HFC
or
MD ART pipes + MD Shockwave TDX2
MD 5/16ths spacer
Gordon Gee 10-wire kit
Z-tube
275/40/19 rears (does this count?)
20mm Z1 spacers all around
By year end, hoping to do...
Revised 350z spring install
Rear fender roll
Next year...
Sway bars
Clear corners
MD ART pipes + MD XYZ with HFC
or
MD ART pipes + MD Shockwave TDX2
#24
okay i'll bite...
this yr on my car:
- Samco intake tube, black(sold ARC pipe)
- Nismo low-temp thermostat
- SxExCx custom grounding kit, red(trashed Stillen kit)
- Custom Saikou Michi Stage 1 oil-catch-can w/sight-tube option(trashed WR can)
- JWT oil pan spacer
- JWT S2 cams w/custom valve buckets, DLC coated
- Fast Intentions resonated cat pipes(burnt out my Kinetix HFCs)
- Custom rear-section true-dual conversion w/3.7" rolled & burned titanium tips added to Stillen Generation 2 dual-path cat-back exhaust
- Transgo VB upgrade
- Stillen transmission cooler kit
- Pi-Thon polished; power steering, coolant, and windshield washer caps
- Titanium dress up bolt kit(gold bolts w/machined washers)
- Custom BC Racing BR coilovers w/Swift springs & VRH front suspension kit by Umbrella Auto Design(put old setup on Wife's car)
- Whiteline Plus urethane front lower inner control arm bushings
- AMS adjustable end-links
- Megan Racing roll center adjusters
- Stillen front strut brace, custom satin black powder-coat(NRG cf brackets didn't clear my BC dampening *****)
- Forged Performance SS brake lines w/Motul RBF 600(Goodridge line burst on me)
- Custom Nismo by Rays Engineering LMGT4(forged monoblock), 2-stage golden bronze powder-coat: 19x8.5 +25 & 19x9.5 +30(sold Forgestar F14's)
- Project Kics R40 Revo, Black w/Red caps(already off)
- Rays extended lugs, Red(now on)
- Custom Sparco Chrono Road racing seats reupholstered to match OEM Willow interior w/Sparco brackets, sliders & hardware
- Recaro Vivo booster seat, midnight desert
- Domo Kun seatbelt shoulder pads
- Custom IGT V2 cf steering wheel
- Works Bell cf Column + Paddle shifter kit
- Custom KJ burned Ti shift **** w/NiftyShifty shift-boot
- 3M Scotchprint 1080 cf vinyl wrapped door pulls(pulled 3M Di-Noc off)
- Custom CBK by JLC quad projector headlights w/haloed "Iron Man" shrouds and 2-tone housing
- LED upgraded my OEM 05-06 reverse lights
- Autotecknic 6pc cf pillar panel covers
- 3M Scotchprint 1080 cf vinyl roof wrap(pulled 3M Di-Noc off)
- PIAA Forza Hybrid Silicone wiper blades
- Custom StrafeDGenius cf front splitter for Nismo Aero w/APR front trim and support rods
- D1 Generation Plus Flush cf hood pins
- Custom fit EuroBoutique IS-F rear "Sharkfin" under-diffuser
my Wife's G this yr:
- APEX'i drop-in panel filter
- OEM G coupe RevUp air-box
- Stillen z-tube
- Custom Magnaflow axle-back plus TopSpeed burned Ti slide tip(pulled previous custom Vibrant axle-back off)
- Stillen sway-bars
- H&R Sport lowering springs w/Tokico "Blues" HP shocks & struts(off my car, switched out her old Eibach ProKit)
- Rays extended lugs, blue
- OEM G coupe/350z Brembo sport brakes(in custom teal)
- Girodisc stage 2 kit: 1pc slotted rotors, SS lines, GD Magic pads and Motul 600 RBF
- CBK dual projector retrofit w/Iron-Man halos
- JDM clear "bump" corners
- OEM Rays Forged 350z v.1 Track wheels: 18x8 +30 & 18x8.5 +33
- Ebay N1 front lip(already gone, someone jacked it)
next yr, a few small projects for my car and possibly some big ones for her car.
this yr on my car:
- Samco intake tube, black(sold ARC pipe)
- Nismo low-temp thermostat
- SxExCx custom grounding kit, red(trashed Stillen kit)
- Custom Saikou Michi Stage 1 oil-catch-can w/sight-tube option(trashed WR can)
- JWT oil pan spacer
- JWT S2 cams w/custom valve buckets, DLC coated
- Fast Intentions resonated cat pipes(burnt out my Kinetix HFCs)
- Custom rear-section true-dual conversion w/3.7" rolled & burned titanium tips added to Stillen Generation 2 dual-path cat-back exhaust
- Transgo VB upgrade
- Stillen transmission cooler kit
- Pi-Thon polished; power steering, coolant, and windshield washer caps
- Titanium dress up bolt kit(gold bolts w/machined washers)
- Custom BC Racing BR coilovers w/Swift springs & VRH front suspension kit by Umbrella Auto Design(put old setup on Wife's car)
- Whiteline Plus urethane front lower inner control arm bushings
- AMS adjustable end-links
- Megan Racing roll center adjusters
- Stillen front strut brace, custom satin black powder-coat(NRG cf brackets didn't clear my BC dampening *****)
- Forged Performance SS brake lines w/Motul RBF 600(Goodridge line burst on me)
- Custom Nismo by Rays Engineering LMGT4(forged monoblock), 2-stage golden bronze powder-coat: 19x8.5 +25 & 19x9.5 +30(sold Forgestar F14's)
- Project Kics R40 Revo, Black w/Red caps(already off)
- Rays extended lugs, Red(now on)
- Custom Sparco Chrono Road racing seats reupholstered to match OEM Willow interior w/Sparco brackets, sliders & hardware
- Recaro Vivo booster seat, midnight desert
- Domo Kun seatbelt shoulder pads
- Custom IGT V2 cf steering wheel
- Works Bell cf Column + Paddle shifter kit
- Custom KJ burned Ti shift **** w/NiftyShifty shift-boot
- 3M Scotchprint 1080 cf vinyl wrapped door pulls(pulled 3M Di-Noc off)
- Custom CBK by JLC quad projector headlights w/haloed "Iron Man" shrouds and 2-tone housing
- LED upgraded my OEM 05-06 reverse lights
- Autotecknic 6pc cf pillar panel covers
- 3M Scotchprint 1080 cf vinyl roof wrap(pulled 3M Di-Noc off)
- PIAA Forza Hybrid Silicone wiper blades
- Custom StrafeDGenius cf front splitter for Nismo Aero w/APR front trim and support rods
- D1 Generation Plus Flush cf hood pins
- Custom fit EuroBoutique IS-F rear "Sharkfin" under-diffuser
my Wife's G this yr:
- APEX'i drop-in panel filter
- OEM G coupe RevUp air-box
- Stillen z-tube
- Custom Magnaflow axle-back plus TopSpeed burned Ti slide tip(pulled previous custom Vibrant axle-back off)
- Stillen sway-bars
- H&R Sport lowering springs w/Tokico "Blues" HP shocks & struts(off my car, switched out her old Eibach ProKit)
- Rays extended lugs, blue
- OEM G coupe/350z Brembo sport brakes(in custom teal)
- Girodisc stage 2 kit: 1pc slotted rotors, SS lines, GD Magic pads and Motul 600 RBF
- CBK dual projector retrofit w/Iron-Man halos
- JDM clear "bump" corners
- OEM Rays Forged 350z v.1 Track wheels: 18x8 +30 & 18x8.5 +33
- Ebay N1 front lip(already gone, someone jacked it)
next yr, a few small projects for my car and possibly some big ones for her car.
![Smilie](https://g35driver.com/forums/images/smilies/smile.gif)
#26
#28
This year-
Modded my stock bumper in leiu of replacing the whole thing with a Kuruma Z bumper (probably coming in the next year or two)
Added yellow euro foglights
7" touchscreen DVD, Bluetooth, iPad compatible head unit
Replaced speakers with Infinity Reference speakers and added sub with amp mounted where stock Bose 8" sub was previously
Cleaned up all the turbo piping front and rear and re-painted it
Rewrapped turbo pipe in new clean header wrap
New wheels and tires
Carbon Fiber wrapped various interior parts
Changed out shift ****
Transgo shift kit
Trans cooler
Replaced all trans fluid with Nissan Matic S
Blacked the grill and replaced Infiniti badge with a Nissan badge (mine was all chipped up and destroyed from last winter)
Next year-
Move and rerun rear mount turbo piping through transmission tunnel to get rid of some of the low hanging things under the car
Then lower the front of the car to level it out with Z springs
Install wideband and boost controller and up the boost to about 8-9 pounds,![Big Grin](https://g35driver.com/forums/images/smilies/biggrin.gif)
Pics of the bumper before:
![](https://lh4.googleusercontent.com/-a5d4YD0B1HA/TdmgdE-W63I/AAAAAAAAAEc/NXgemY37Qfo/s640/71887_449697899042_511384042_5113969_1549841_n.jpg)
Pics of the bumper after:
Modded my stock bumper in leiu of replacing the whole thing with a Kuruma Z bumper (probably coming in the next year or two)
Added yellow euro foglights
7" touchscreen DVD, Bluetooth, iPad compatible head unit
Replaced speakers with Infinity Reference speakers and added sub with amp mounted where stock Bose 8" sub was previously
Cleaned up all the turbo piping front and rear and re-painted it
Rewrapped turbo pipe in new clean header wrap
New wheels and tires
Carbon Fiber wrapped various interior parts
Changed out shift ****
Transgo shift kit
Trans cooler
Replaced all trans fluid with Nissan Matic S
Blacked the grill and replaced Infiniti badge with a Nissan badge (mine was all chipped up and destroyed from last winter)
Next year-
Move and rerun rear mount turbo piping through transmission tunnel to get rid of some of the low hanging things under the car
Then lower the front of the car to level it out with Z springs
Install wideband and boost controller and up the boost to about 8-9 pounds,
![Big Grin](https://g35driver.com/forums/images/smilies/biggrin.gif)
Pics of the bumper before:
![](https://lh4.googleusercontent.com/-a5d4YD0B1HA/TdmgdE-W63I/AAAAAAAAAEc/NXgemY37Qfo/s640/71887_449697899042_511384042_5113969_1549841_n.jpg)
Pics of the bumper after:
![](https://lh3.googleusercontent.com/-24w3ElGQuis/TdmgIz_6oAI/AAAAAAAAAD0/zKUFE-5oPNg/s640/2011-02-18_14-30-41_267.jpg)
#29
#30
But while we are on the topic, I had a very generous 5 figures into my G before I parted out.