ahhh tsolin i wanna see your G =) Drew hahah sick sig!! Can you do that for mine, cause you know i actually really do it to my car Anyway Drew ill mow your lawn when you WAX MY DAMM CAR hahah!!


Martin
2003.5 BS G35
Nismo Aero/Sport Package
0-60 5.4 - 1/4 Mile 14.16 *GTech* and on 19's!!

 

BEMEG35 If you want to come PLEASE just post and you are added to the list...but you have to be a definate "YES"...we dont do maybe's, might's, I'll let you know's, etc.....LOL....So if you are in just post and your on the list.

AS USUAL please see the first post for updates

I'm still waiting to hear back from AFROPUFF...SO Puff please respond to my PM when you get a sec..., so I know whats up.....thanks

 

Neil, you are probably correct. Their stuff is so pricey, but some of their products are well worth it.

John

 

There's always some kind of DIY's at the meets... If you need help with the Pedal installs, I'll help ya out. But it'll be tough without HOT water to soak it in. The clutch/brake pedals are actually pretty wide, you gotta start at the top, and use a side-to-side motion to wiggle it in... Also, notice the bottom corners are not covered in Alumium so that gives you a little room for wiggling.

I would bring my Jack, but it weighs a crapload... and with my sub/amp/etc... I'd be really bogged down with all the extra weight. I'm sure Atlantic should have one for us to borrow??

 

If you look in your trunk, under the carpet, there is a jack in there. It works pretty good too! In addition, if you try just using a regular floor jack, it won't fit under the car. I don't like jacking up the car from the pinch weld with a floor jack so I slap a piece of cardboard on the pad and jack it up from the frame.
The stock jack is all you need! I need to do my lights too so maybe we'll work together n get both done. We can do them as my Zaino dries! LOL


www.gsquad.org

 

I need to do my clearance lights and high/fogs.. count me in.

John

 

WE are discussing the fine details very soon with ATLANTIC....We'll let you know whats up with all of that...

Remember due to saftey regualtions we may not be able to work with their jacks or do work with our own jacks on the premesis .....we'll find out and let all you guys know the run down

With that and food and set up...etc...as usual we'll give full details....

BALLIN you need to make a decision man....you are yellin DIY but havent even signed up yet.....make it happen Sam...whats up

 

If that's the real deal Sam, then why all the 411 inquiries comin out of u for mods and such. U even want to put our Zaino experts at risk consorting with a felon...... stay home and watch the paint dry. =)

 

SOLUTION:

DON'T DRIVE THRU JERSEY!!! Go around... [img]/w3timages/icons/smile.gif[/img]

 

for the clearance light, i thought you didn't need to jack up the car and take off the wheel? just turn the wheel all the way to one side, pull down the cover and you can access the lights no problem? I haven't put mine in yet, but i'm planning to do it this weekend hopefully if it doesn't rain...



------------
2005 G35 Coupe Auto DG/G
Prem / Nav / Sport / Aero / Splash Guards
Z-Tube / Pop Charger / Clear Corners

 

Tsolin... ~1week, and you're already looking to do clear corners and clearance lights already?? Man, you must have a case of the "Mod Itch" that's going around... lol [img]/w3timages/icons/laugh.gif[/img]

No, you don't need to Jack up your car... but it does make it a hell of a lot easier to do the job.

 

Nov 14th?? Hmmmm...count me in.

<font color=blue>Kevin</font color=blue> aka <font color=blue>Frosty</font color=blue>
2[img]/w3timages/icons/cool.gif[/img][img]/w3timages/icons/tongue.gif[/img]3 G35c-6MT