FS: ShanesG Official Part-out thread
#91
#93
#95
OK here is my updated list.
Please don't ask about the hose clamps or dress up bolts, i have them scattered all over the place and will eventually list those once i have everything put back together and organized.
Engine bay:
Samco Hoses(Black) - $90
Polished Powersteering Tank - $120
Exterior
My original oem emblemless grill(has some cracks where the bondo is) - $150
Suspension -
CF Richie Strut bar - $220
UAS Air suspension(will be last to go) - $1500
Cusco Front A-arms - $250
SPC Rear Camber arms - $120($150 with toe bolts)
2 sets of toe bolts - $40 each
Wheels/Brakes
Kranson forged Klassic - $2800 current condition or +$??? with new barrels depending what you want.
20x10 - 4 4" lip
20x12 -8 5.5" lip
Textured Anthricite faces
Titanium Rivets
General exclain UCP 225/30 front tires i'll give you
I have the fronts currently disassembled, i was planning on getting 2 new inners since 2 have cracks and 2 new outters. Ill sell the set in their current condition or i will order the new barrels and you'd obviously pay the difference. I was going to put the 5.5" lip up front and get 6" for the rear but if there is something else you want we can work that out.
H&R 25mm spacers - $100
Ichiba 25mm Spacers - $100 Some of the studs and lugs need to be replaced
Project Mu Lugs - $150
Interior:
CF wraped door pulls, center console, dash strip minus ash tray- $100 + oem
This was done with the actual fabric before the di-noc came out
Random Stuff Laying around
G37 coupe Headlights no ballasts - $650
(2) -05+ Climate display w/o Clock - $40
1 - 03-04 door pull cover
Please don't ask about the hose clamps or dress up bolts, i have them scattered all over the place and will eventually list those once i have everything put back together and organized.
Engine bay:
Samco Hoses(Black) - $90
Polished Powersteering Tank - $120
Exterior
My original oem emblemless grill(has some cracks where the bondo is) - $150
Suspension -
CF Richie Strut bar - $220
UAS Air suspension(will be last to go) - $1500
Cusco Front A-arms - $250
SPC Rear Camber arms - $120($150 with toe bolts)
2 sets of toe bolts - $40 each
Wheels/Brakes
Kranson forged Klassic - $2800 current condition or +$??? with new barrels depending what you want.
20x10 - 4 4" lip
20x12 -8 5.5" lip
Textured Anthricite faces
Titanium Rivets
General exclain UCP 225/30 front tires i'll give you
I have the fronts currently disassembled, i was planning on getting 2 new inners since 2 have cracks and 2 new outters. Ill sell the set in their current condition or i will order the new barrels and you'd obviously pay the difference. I was going to put the 5.5" lip up front and get 6" for the rear but if there is something else you want we can work that out.
H&R 25mm spacers - $100
Ichiba 25mm Spacers - $100 Some of the studs and lugs need to be replaced
Project Mu Lugs - $150
Interior:
CF wraped door pulls, center console, dash strip minus ash tray- $100 + oem
This was done with the actual fabric before the di-noc came out
Random Stuff Laying around
G37 coupe Headlights no ballasts - $650
(2) -05+ Climate display w/o Clock - $40
1 - 03-04 door pull cover
Last edited by ShanesG; 01-02-2013 at 05:00 PM.
#99
#100
^Hey, so it's just the door pulls, radio face, shifter, and the long strip on the passenger side(also the rear cubby piece that in the rear seat as well if you want that.). I cant send you the ashtray though because it's cut out for my air suspension gauge but i think i have some extra material i can send
#102
#105
OK here is my updated list.
Please don't ask about the hose clamps or dress up bolts, i have them scattered all over the place and will eventually list those once i have everything put back together and organized.
Engine bay:
Samco Hoses(Black) - $90
Polished Powersteering Tank - $120
Exterior
My original oem emblemless grill(has some cracks where the bondo is) - $150
Suspension -
CF Richie Strut bar - $220
UAS Air suspension(will be last to go) - $1500
Cusco Front A-arms - $250
SPC Rear Camber arms - $120($150 with toe bolts)
2 sets of toe bolts - $40 each
Wheels/Brakes
Kranson forged Klassic - $2800 current condition or +$??? with new barrels depending what you want.
20x10 - 4 4" lip
20x12 -8 5.5" lip
Textured Anthricite faces
Titanium Rivets
General exclain UCP 225/30 front tires i'll give you
I have the fronts currently disassembled, i was planning on getting 2 new inners since 2 have cracks and 2 new outters. Ill sell the set in their current condition or i will order the new barrels and you'd obviously pay the difference. I was going to put the 5.5" lip up front and get 6" for the rear but if there is something else you want we can work that out.
H&R 25mm spacers - $100
Ichiba 25mm Spacers - $100 Some of the studs and lugs need to be replaced
Project Mu Lugs - $150
Interior:
CF wraped door pulls, center console, dash strip minus ash tray- $100 + oem
This was done with the actual fabric before the di-noc came out
Random Stuff Laying around
G37 coupe Headlights no ballasts - $650
(2) -05+ Climate display w/o Clock - $40
1 - 03-04 door pull cover
Please don't ask about the hose clamps or dress up bolts, i have them scattered all over the place and will eventually list those once i have everything put back together and organized.
Engine bay:
Samco Hoses(Black) - $90
Polished Powersteering Tank - $120
Exterior
My original oem emblemless grill(has some cracks where the bondo is) - $150
Suspension -
CF Richie Strut bar - $220
UAS Air suspension(will be last to go) - $1500
Cusco Front A-arms - $250
SPC Rear Camber arms - $120($150 with toe bolts)
2 sets of toe bolts - $40 each
Wheels/Brakes
Kranson forged Klassic - $2800 current condition or +$??? with new barrels depending what you want.
20x10 - 4 4" lip
20x12 -8 5.5" lip
Textured Anthricite faces
Titanium Rivets
General exclain UCP 225/30 front tires i'll give you
I have the fronts currently disassembled, i was planning on getting 2 new inners since 2 have cracks and 2 new outters. Ill sell the set in their current condition or i will order the new barrels and you'd obviously pay the difference. I was going to put the 5.5" lip up front and get 6" for the rear but if there is something else you want we can work that out.
H&R 25mm spacers - $100
Ichiba 25mm Spacers - $100 Some of the studs and lugs need to be replaced
Project Mu Lugs - $150
Interior:
CF wraped door pulls, center console, dash strip minus ash tray- $100 + oem
This was done with the actual fabric before the di-noc came out
Random Stuff Laying around
G37 coupe Headlights no ballasts - $650
(2) -05+ Climate display w/o Clock - $40
1 - 03-04 door pull cover