How do I remove the front liscense plate assembly? - G35Driver

Sep 26, 2003 | 11:48 PM

SkylineGT

Thread Starter

Registered User

Joined: Aug 2003

Posts: 483

Likes: 1

From: San Francisco, CA

How do I remove the front liscense plate assembly?

I took out the outer frame...but the black plate in the back was also bolted on with 2 screws within 2 white locks which keep the plate in place. I removed both screws...but the white locks were still there...how should I remove them? Any suggestions will be appreciated.

Sep 27, 2003 | 03:16 AM

MNDZA

Guest

Posts: n/a

Re: How do I remove the front liscense plate assembly?

If you remove it, then you're going to see 2 big, ugly holes. Leave it on......holes are bad.

Sep 27, 2003 | 03:26 AM

wickedG35

Registered User

iTrader: (1)

Joined: Jan 2003

Posts: 3,977

Likes: 0

From: SoCal

Re: How do I remove the front liscense plate assembly?

Agreed. You will have two holes visible and you don't want that. You can always pop in some black screws but it won't look that good. The other option is to re-fiberglass the front to cover the holes but it's costly.

-wicked
-Black/Black G35 coupe

Sep 27, 2003 | 08:57 AM

dave_c

Registered User

Joined: May 2003

Posts: 98

Likes: 0

From: Boston

Re: How do I remove the front liscense plate assembly?

I took off the front plate and put in bumper plugs.

www.bumperplugs.com

There ridiculously overpriced, but I did it anyway

Coupe 6MT
Laser Red

109709-fb3d063b.jpg.orig.JPG

Sep 27, 2003 | 01:28 PM

DragonGcoupe

Registered User

Joined: Sep 2003

Posts: 1,663

Likes: 0

From: Southern Cali

Re: How do I remove the front liscense plate assembly?

Yea, the front thing pissed me off. Not only do I have big ugly wholes in the bumper, but the dealer messed up on the screws holding the other part in. So the short screws chipped the paint off the front end. So I have 4 marks on the front bumper. Im going to take it back to repair the paint damage.

Black / Black 2004 GcoupeMT. Premium. Side, rear guardz.