If anyone has a service manual and can tell me the wiring setup for the VDC I would be greatly appreciative...I want to remount my relocated button with a new smaller button...but I need to know what each wire does, so If anyone has the mitchell sheet or a service manual please can you post what they do...
Re: Need wiring help with VDC
looking at teh button if you take it out, the connecter has 4 pins from the "bottom" going from bottom to top, the bottom 2 are the latch buttons that when closed activate/deactive teh vdc, the top 2 wires are power for illumination. this is easily double-checked with a vold or ohm-meter
we got that far...what kind of button do you recommend to hook up to it
Premier Dough Slapper
What kind do you want???
Here go shopping:
http://www1.mscdirect.com/CGI/INSRHI?PMSECT=10059
or
http://www.alliedelec.com/Catalog/In...eq=1060&IND=SP
Both MSC and Allied have just about any kind and style switch you could ever want, need, or imagine....
Good Luck!
Here go shopping:
http://www1.mscdirect.com/CGI/INSRHI?PMSECT=10059
or
http://www.alliedelec.com/Catalog/In...eq=1060&IND=SP
Both MSC and Allied have just about any kind and style switch you could ever want, need, or imagine....
Good Luck!
I need a button that will ground when activated...there is something in the stock vdc button that does that...anyone attempted to hook up an aftermarket button yet?