could someone tell me wat on earth this is..
could someone tell me wat on earth this is..
http://www.6mt.net/mod-g35-window-tint.php
check out the back windshield pictures...what kind of tint is that?black on outside but white on inside????i dont get it..
help me understand this pelase..thanks
check out the back windshield pictures...what kind of tint is that?black on outside but white on inside????i dont get it..
help me understand this pelase..thanks
Registered User
Joined: Mar 2006
Posts: 292
Likes: 0
From: Southwest Michigan
It's standard tint on the outside, but solid black vinyl along the top on the inside. You have to read what he wrote . . .
"Next, see how they plan to attack those annoying dots at the top of your rear windsheild. My installer first attempted to cover them, and it appeared to work great. However, a day later, the tint began to peel and "fall off" of the dots. As a solution, my installer was able to mount a black vinyl banner ON THE INSIDE to cover the dots. While the black vinyl banner is not rare, mounting it on the inside of the glass is! Most installers will put the vinyl banner on the outside of the window. Mounting it on the inside, gave a flawless look. The installer ran the seam (tint/banner seam) along the top wire of the rear defroster. At first, this looked a little extreme, but it ends up looking much better from the outside."
"Next, see how they plan to attack those annoying dots at the top of your rear windsheild. My installer first attempted to cover them, and it appeared to work great. However, a day later, the tint began to peel and "fall off" of the dots. As a solution, my installer was able to mount a black vinyl banner ON THE INSIDE to cover the dots. While the black vinyl banner is not rare, mounting it on the inside of the glass is! Most installers will put the vinyl banner on the outside of the window. Mounting it on the inside, gave a flawless look. The installer ran the seam (tint/banner seam) along the top wire of the rear defroster. At first, this looked a little extreme, but it ends up looking much better from the outside."
Trending Topics
Registered User
iTrader: (10)
Joined: Jul 2006
Posts: 3,942
Likes: 7
From: PNW in Washington
6MT Coupe
Some tinters do that vinyl on the outside over the dots first, then the tint film over the vinyl. Our G's have a lot of matrix dots there, more so than other vehicles.
[edit]....oops...I meant on the inside...dohh...that's where the tint goes and where the dots are
[edit]....oops...I meant on the inside...dohh...that's where the tint goes and where the dots are
Last edited by V35 Skyline GT; Oct 24, 2006 at 10:54 PM.
Who ever Gunn Infiniti got to install my tint did a great job. I could find only 2 VERY small bubbles at the corner of the right back passengers glass. The rear window is perfect. Didn't need to cover anything with black.
Mine was done great as well. The key is that once or twice a day, you SHOULD press the tint down over the matrix dots to make sure the tint can stick in between...Rick
Last edited by ISMSOLUTIONS; Oct 25, 2006 at 12:26 PM.
Umm, that vinyl strip on the silver G35 looks horrible. It takes up almost 1/4 of the rear window. Sanding down the dot matrix and pressing it down daily as it dries is normally yields the best results.
