I am going to take a wild guess and assume that "DFW" is Dallas Fort Worth area? Maybe one of the members near you has an Unorthodox pulley or is familiar with them and you could compare in person. Or maybe there is a shop nearby that might have an Unorthodox in stock. That's probably the best bet.

although this is already worrisome:
"No steel sleeve on the crank pulley = oil seal making a groove in the aluminum pulley = oil leaks."

 

yeah i was checking over them. the install instructions mention about doing something about that.

 

I found this one, it doesn't seem to have any steel sleeve either. Can you elaborate Jeff92se?

 

Unclear.

Something about what? Oil leaks?

 

i will take a pic of the install instructions...see if i can get it to where you can read it..I found a pic of it installed on another car and its looks exactly the same as the other.

 

my camera cant focus good enough...but it says:

When installing the crankshaft pulley lightly coat the inner bore of the new pulley with anti-seize compound and tighten the crankshaft pulley bolt. then it says to make sure that the crank snout edges has no burrs, if no burrs are present pulley will slip on easily and seat properly. If the pulley is tight then clean crank snout.

Is this normal when installing something like this?

 

Yes.

 

ok then thats basically all it says....should the crank pulley come with the steel sleeve? The pictures on google with these dont show it either..

 

i read something on here about getting belts for this? do you know exactly which ones to get? I read that there is a better belt than what they suggest...i cant find the thread anymore.

 

Yeah, I don't know about that. That's just what Jeff said, and we'll see if anyone elaborates on that.

 

You can't tell from that view. You need the other side of the pulley. The other is the side that rides on the crank pulley oil seal.

 

what do you mean? Elaborate for me? Are these the correct belts?

Gates K060445 for Alternator power steering and water pump belt (45 1/4" or 1150mm)

Gates K040353 Air Conditioning belt (35 7/8" or 910mm)

 

That's correct according to UR's website.

 

ok cool just making sure that there install instructions have all the right stuff on it! At least i know that part is right.

 

I see that Jeff got on here ...should of asked him if they have the steel sleeve? should i email intensepower and ask them if theres come with it?