Originally Posted by aHero4Eternity

it's very simple.

1) remove the 4 clips on the top.

2) then in each upper corner, you'll need a flat head screw driver to turn the clips 1/4 clockwise/counter-clockwise (i forgot which). it should look like <-> before you turn it and [\] after. when you see you you'll know what i mean.

3) pull the grille out of the 6-8 tabs from the bottom.

4) put the new grille in place an hold it in with the 4 top clips (yes, these 4 clips are enough to hold it in).

shouldn't take more than a few minutes.