Hi everyone,

I've been having some problems with my brakes and the shop showed me how the seal on the cap of the brake fuild reservoir is no longer air tight. Therefore they suggested that I get a new cap before they start doing more than bleeding the brakes (which was done but not much improvement because air still gets in).

I've looked in all the OEM parts online site I know and no luck, at least without the part number.

Any help would be greatly appreciated.

Thanks

 

Call Riverside Infiniti or West Covina Nissan...there both have very helpful parts departments

 

Even a MISSING cap will not let air into the system unless you really splash it around a lot. The cap is to keep MOISTURE out.

Most likely you will have to order one from the dealer. Try a NISSAN dealer if you don't have an Infiniti dealer close by. The master cylinders should be the same on the Maxima. Also try a junk yard.

 

Thanks for the info guys.

I'll give riverside a call & try local Nissan dealership.