I'm trying to change the small red bulb next to the clock. The blinking light that our alarm is hooked up to I guess. I saw a thread a while back about changing the light. I was wondering if anyone knows what size and wattage that light is and where I can find one?

 

It's a LED, so there is no wattage rating. Its an odd size also, Bigger then a 3mm, but smaller then a 5mm. Some people ream out the hole to squeeze a 5mm in, but I took a thick piece of black paper and gently poked a hole with a 3mm LED in it. I then used the paper as a bezel and you can't tell at all that the 3mm LED is a tad too small. Once you pop out the center housing you will see that the LED is soldered to a circuit board. Carefully remove it and replace it with you new LED. Good places to look for LEDs are Radioshack, or check out www.digikey.com.



Kevin
www.KPtechnologies.net
AIM: KPiersonTec
04 DG Coupe / VDC Memory
OEM Remote Window up mod
Procharged / Crawford / TS

 

Here's the link for the DIY for swapping out the Security LED.

I changed mine to the RadioShack Blue LED.

https://g35driver.com/forums/showfla...=5&part=3&vc=1

docron1 aka joe

 

That link don't work, can any bro find it again? Would appreciate it

 

Nine years later....

Google led power basics.