H-techs gettin ordered friday

 

I highly suggest spring mount mod.

order some rubber mounts cut them 1/4 or 1/2 inch and insert them while doing spring install.

 

Yea I have that on a "possible" list, cause I am not sure what it is, but my butt seems low...DON'T LOOK! jeez perv... But as you can see from that pic, the rear is pretty low, and again thats NO drop...either case, I've read up on it, and the SMM is on tap if needed, but we're gonna see how the springs do first

 

I've warned you..

I use to have Z htechs and trust me smm is a must do. The front will look much lower compared to the rear. And that mindset you'll get thinking the rear will settle more, it wont.

enjoy..

 

Warning noted! Thank ya I'll post up pix once its done

 

cool

 

Ok, so next question.
I am looking at doing H tech springs, the G35 ones.
I would rather not roll my fenders, so lets say i go with 15mm spacers on all 4, about what size tire should i then be looking at?

 

With 15mm's I don't see any issues with 245/255 Fr/Rr set up. Specially with the natural tuck you'll get when lowering the car, there shouldn't be any rubbing and no roll needed. And personally I wouldn't go too much wider on the OEM 19's.

 

dont get g h techs, get Z h techs

start reading up on spring rates.