Takeda short ram intake or Fujita short ram??
#16
Registered User
iTrader: (10)
#18
#21
#23
#27
i was told by more than one person that the fit was bad, the material was bad and the kits are of a porr quality. I have no personal proof of that but was just passing along what i had been told. I have seen a few different spacers now and would recomment the MD 1/2" kit. i went for temporary solution and put a 5/8" BLOX spacer on and have been very su[rised at how much a difference it makes. will leave it on till next year and then go to MD and include the hot water feed tap.
#28
i was told by more than one person that the fit was bad, the material was bad and the kits are of a porr quality. I have no personal proof of that but was just passing along what i had been told. I have seen a few different spacers now and would recomment the MD 1/2" kit. i went for temporary solution and put a 5/8" BLOX spacer on and have been very su[rised at how much a difference it makes. will leave it on till next year and then go to MD and include the hot water feed tap.
#29
it made a huge difference to the engine roar, but not sure how much is adds to performance. I have it with an injen induction kit and a duel exhaust system. i know that airflow is greatly improved as now nearly all the restrictions have been removed. For the money they cost, is defo something to consider before putting on a much more expensive spacer like a full MD kit.