I have 2800 miles on the car and the clutch is hiting a little high is this normal or am I burning the [censored] out of my clutch. I do not drive hard on it or anything well somtimes I do but nothing to harsh. can you adjust the clutch so it does not hit high

 

(I got this picture from fresh alloy)

1- Loosen the locknut. Use some pliers or a punch to hold the fork(I used a punch), then take a 12mm wrench and break the locknut loose.
2- Push down slightly on the clutch pedal to release the tension on the rod.
3- Turn the rod clockwise. You'll notice that the rod is threading deeper INTO the fork.
4- Tighten the locknut.

I turned the actuator 3 times...but start off with 2 and see how you like it.



http://www.villagephotos.com/pubbrow...elected=551133

332253-Clutch1a.jpg

 

you the man thanks dude.....