06' 5at athens blue stock (NOOB)

I'm planning on installing a 5 1/6 motordyne spacer.
1. I live in NY is copper needed because it gets cold here.
2. I'm putting a z tube in also.
3. What is a mrev2? I did do some research and I'm not sure if the 06' is a rev up engine or not.
With these mods does the ECU need to be reflashed.

Also what size spacer is needed to bring the stock wheels closer to the outside of the car.

Thanks Charlie

 

MREV2 + 5/16th spacer is a great mod together on rev-ups.

You can get a reflash, it will help some if you do.

25mm all 4 corners.

 

Only 6MT's have the rev up engine, so no, you don't have it or need the mrev2.

You don't need to reflash the ecu, just reset it (unplug the battery for 1+ hrs). I suggest waiting until you get all your breather mods done before you get a reflash.

+1 on 25mm all around if you have the oem 19"s.

 

Pretty sure all '06 are revup - check your redline to confirm. I believe 7K is the revup redline.

EDIT: NM Silencer_0 is more informed - believe him first.

 

I have 18's do i still go with 25mm wheel spacers

charlie

 

05+ 6MT's are rev-up, no 5AT's are rev-up.

 

7k is redline, but I don't know it 06 are all rev-ups or not.

if it isn't rev-up like Silencer said don't bother.

I think 25mm will still suit your 18's well.

 

^+1 25mm all around should still be ok.

 

Do you have to buy the MREV2 AND plenum spacer to get the 15HP increase or is that just the MREV 2?

 

^^ if you have a rev-up get both, if not get the spacer only.

 

Ah ok, thanks

 

Yes, in order to get the 15HP/18TQ+ gains you need both the spacer and mrev2. But that's only if you have a REV-UP engine, which you being a 5AT, do not have. So don't even bother getting the mrev2. Just get the iso-thermal spacer kit by itself, it's still good for 10-12HP and is one of the best mods to do.

 

That wasn't me with the 5at i just hi-jacked the thread =P

 

Whoops haha. Well then in your case if you have a rev up, get both!

 

Gary