Headlight Aim Help - URGENT!
#1
Headlight Aim Help - URGENT!
Hi Guys,
Looking for some advice, am based in the UK.
My g35 recently failed its MOT due the headlight aim being too high, the garage have defintely stripped out the adjustment gears and snapped one of the housings (even though they deny this). Is there;
a) any other way of manually adjusting the aim so I can get the car through its MOT? Going to look at maybe going in from behind the wheel arch with a pair of pliers
or
b) purchasing replacement gear/housing set
Any advice very much appreciated, Ive filed a complaint against said garage but my car is off the road until I get the aim issue sorted
Thanks
Sai
Looking for some advice, am based in the UK.
My g35 recently failed its MOT due the headlight aim being too high, the garage have defintely stripped out the adjustment gears and snapped one of the housings (even though they deny this). Is there;
a) any other way of manually adjusting the aim so I can get the car through its MOT? Going to look at maybe going in from behind the wheel arch with a pair of pliers
or
b) purchasing replacement gear/housing set
Any advice very much appreciated, Ive filed a complaint against said garage but my car is off the road until I get the aim issue sorted
Thanks
Sai
#2
Registered User
iTrader: (21)
Assuming you have the 06 + projectors, here you go
https://g35driver.com/forums/body-in...rojectors.html
https://g35driver.com/forums/body-in...rojectors.html
#3
Assuming you have the 06 + projectors, here you go
https://g35driver.com/forums/body-in...rojectors.html
https://g35driver.com/forums/body-in...rojectors.html
Hi Guys,
Looking for some advice, am based in the UK.
My g35 recently failed its MOT due the headlight aim being too high, the garage have defintely stripped out the adjustment gears and snapped one of the housings (even though they deny this). Is there;
a) any other way of manually adjusting the aim so I can get the car through its MOT? Going to look at maybe going in from behind the wheel arch with a pair of pliers
or
b) purchasing replacement gear/housing set
Any advice very much appreciated, Ive filed a complaint against said garage but my car is off the road until I get the aim issue sorted
Thanks
Sai
Looking for some advice, am based in the UK.
My g35 recently failed its MOT due the headlight aim being too high, the garage have defintely stripped out the adjustment gears and snapped one of the housings (even though they deny this). Is there;
a) any other way of manually adjusting the aim so I can get the car through its MOT? Going to look at maybe going in from behind the wheel arch with a pair of pliers
or
b) purchasing replacement gear/housing set
Any advice very much appreciated, Ive filed a complaint against said garage but my car is off the road until I get the aim issue sorted
Thanks
Sai
#7
Trending Topics
#8
As a very short term "solution", can you just let some air out of the front tires and over inflate the rears a bit?
As I type this, I forsee it's going to end up as someone's signature quote, but I'm just trying to brainstorm a way to get you through the inspection until a more permanent fix can be made.
As I type this, I forsee it's going to end up as someone's signature quote, but I'm just trying to brainstorm a way to get you through the inspection until a more permanent fix can be made.
#9
#11
Thread
Thread Starter
Forum
Replies
Last Post
THMotorsports
Suspension-Vendor
257
12-18-2018 05:43 PM