Anyone have any pics of Z springs installed on their G? Also any info on how much my suspension will be effected as far as camber etc

 

Hmm did you mean 350z springs?
With your factory G shocks I do not believe you will see a noticeable change as far as rebound and compression. You should just call nissan's parts dept and ask them for spring rates.
You need a coilover kit with camber adjustment for neg or pos camber.....

 

Spring rates are higher with the 350Z springs but not enough for you to notice and drop wouldn't be more than .25" at the very most....why bother?
Gary

 

This is what I pulled from a sticky:

Spring rate depends whether your Z springs are the revised version. And Z springs are supposed to lower 0.5 inch. There's another thread here with pics of a G with Z springs. It's fairly new so you shouldn't have trouble finding it.

**********************************

Oem linear springs
G35 coupes with oem 17’s & 18’s
G35 sedan’s with sport suspension
350Z’s 2003/2004 (unrevised)
Front:314 Rear:342

Oem linear springs
G35 sedan's with non sport
Front: 283 Rear: 308

Oem linear springs
G35 coupes 2005/2006 with oem 19’s only
350Z 2004.5 to 2006 (revised suspension)
Front:314 Rear:427

Any spring or coil over that has “stiffer then oem springs by” does not factor in the higher rear spring rates of 2005 coupes with oem 19’s or 04.5+ oem 350Z’s


Tein S-tech 350z (fronts are progressive, rears are linear) .7”/.6” drop on 350Z G35 drops will be higher
Spring rates in LBS 386/402 (estimated front intial rate is 327lbs)

Tein H-tech 350z linear springs .3”/.2” drop on 350Z G35 drop will be higher
Spring rates in LBS 358/375

Tein H-tech G35 (fronts are progressive, rears are linear) coupe drop .6"/.3" sedan drop 1.4"/.7"
Spring rates in lbs 324/260 (final rates only, softer intial front progressive rate unknown)

Tein S-tech G35(fronts are progressive, rears are linear) coupe drop 1.2"/.9" sedan drop 2"/1.3"
Spring rates in LBS 358/274 (final rates only, softer intial front progressive rate unknown)