RC 550 Injectors installed Vortech G35c
#1
RC 550 Injectors installed Vortech G35c
Well after months of waiting for my car to be returned from the shop it’s finally back (long story). Many forum members were unsure how this would work out, let me be the first person to say it works fine. Today we ran it on the Dyno to see what she can do. Here are the official numbers:
Car: 2003.5 Coupe AT Trans
404.63 RHP
316.55 RTQ
Temp: 86.5
10.5 lb Boost @ 7200rpm
This was accomplished using the following.
1. Stock Vortech fuel system with piggy back pump
2. SS / R4 software managing fuel/ timing
3. No FMU washer reduction used
No additional management systems were used to align the rc500 injectors.
It took approximately 5 hours on the dyno to get the numbers perfect but she will flat out run. I will be posting my R4 settings on my web site for you to review.
Too many mods to list… Complete Web Site
374860-dynolg.jpg
Car: 2003.5 Coupe AT Trans
404.63 RHP
316.55 RTQ
Temp: 86.5
10.5 lb Boost @ 7200rpm
This was accomplished using the following.
1. Stock Vortech fuel system with piggy back pump
2. SS / R4 software managing fuel/ timing
3. No FMU washer reduction used
No additional management systems were used to align the rc500 injectors.
It took approximately 5 hours on the dyno to get the numbers perfect but she will flat out run. I will be posting my R4 settings on my web site for you to review.
Too many mods to list… Complete Web Site
374860-dynolg.jpg
Thread
Thread Starter
Forum
Replies
Last Post
StreetStandard
Engine-Vendor
117
05-22-2020 08:21 AM