My new Varrstoen wheels + 12 offset all around
Congrats on the wheels, I have the same setup. It won't look nearly as flush as you think it is going to be in the rear, I ended up adding 15mm spacers on the rear. But then again you are running much bigger tires and I have no idea how dropped you are, guess we will find out how it looks soon!
Hey, not to hijack your thread or anything but do you or anyone know if I will need some front camber arms if i drop these rims (same exact offset and size) with tein s-techs? Thanks 
Guest
Posts: n/a
I have the +12's with 275's.
It's not that aggressive. Mine looked just as insane, but you gotta remember when jacked up the wheel is "hanging" and not cambered in like when sitting on the ground.
Here's +2 offset and -4.0 camber... I plan on -8 offset...
It's not that aggressive. Mine looked just as insane, but you gotta remember when jacked up the wheel is "hanging" and not cambered in like when sitting on the ground.
Here's +2 offset and -4.0 camber... I plan on -8 offset...
Guest
Posts: n/a
+2 I rub a little on big bumps on the highway. HKS hypermax set to the stiffest they'll go and I'd say it's dropped 2.0'' - 2.5''. The rear is almost maxed out, but the front can be dropped the ground... kind of annoying, but they were what I could afford at the time (used).
in the second pic(not the one with the key) once its installed with the tire sitting onthe ground what camber are you running there? and is this with or without a kit? and were the fenders rolled?(getting these wheels and deciding whether to get +22 or +12)
