Looking to purchase some 350z springs or Tein S springs. But i want to see how the G looks with the 350z springs... Thanks
Registered User
2003 G on 350z S-Tech Springs

As you can see, the front gets down to a 1 or 2 finger gap and the rear is about 3 iirc

As you can see, the front gets down to a 1 or 2 finger gap and the rear is about 3 iirc
Registered User
Visibiliti: That drop is just springs and not coilovers? That looks pretty sick (at least from this angle). I assume you're running a camber kit as well? Also, since I'm in the middle of researching how I wanna change up my ride and always looking for examples... are you running spacers? if so how big? and Are your fenders rolled? Ride looks really good!
Registered User
I can't tell much of a difference between the Z and G springs..I have G ones and I feel slammed in comparison to stock
Registered User
I know I'm sidetracking a little bit, but any input on these? These are the Tein S.Tech springs. These are supposed to lower the front by 1.2 in and lower the rear by 0.9 in. Anybody have any experience with these or can give me some advise on these?

Registered User
Footballmania32
Registered User
close
- Join DateNov 2009
- LocationSan Antonio/The Woodlands, Texas
- Posts:1,623
-
iTrader Positive Feedback100
-
iTrader Feedback Score(15)
-
Likes:130
-
Liked:135 Times in 101 Posts
350z S-techs. Before 1/2" springmount mod:







