having air in brake system
Joined: Oct 2010
Posts: 520
Likes: 12
From: San Diego
Would less stopping force be the only problem or can problems arise where parts need to be replaced due to not having the brake system bled?
Trending Topics
besides poor braking performance, air in the system invites condensation which causes corrosion. brake fluid also transfers heat throughout the system which air pockets prevent. This reduces braking performance because the smaller pockets of fluid are being pushed to or beyond their boiling point.
...just get it done and save yourself and maybe someone else from being hurt. simple, two person, DIY or a piece of cake with a bleeder. if you really want to do the right thing, change the brake fluid while you're at it...probably the best $20 you can spend for the most overlooked maintenance item on most cars.
...just get it done and save yourself and maybe someone else from being hurt. simple, two person, DIY or a piece of cake with a bleeder. if you really want to do the right thing, change the brake fluid while you're at it...probably the best $20 you can spend for the most overlooked maintenance item on most cars.
Question is how did you get air in the lines. Run it low on fluid...took it in thru the brake cylinder? Removed a brake line. That's the only way I know to do it.
+1 Gary... OP, having air in the brakes usually has signs a driver having to press on the brake pedals all the down to the floor. Get the brakes bleed, since it is a liability for yourself and others on the road....
Or if there is too much air in lets say the front right brake and he needs to stop asap, only the left brake will work 100% and the right one is gimped and the car can get squirly and pull real hard.







