Just updated my post. Did the RJM clutch mod.

 

Do you say that because of this?

 

deciding whether or not to paint my rims, get new headlights, exhaust and intake. not a big list but it's good enough for me.

 

- F14's in brushed titanium with Nitto Invos
- Stillen intake
- 5/16th's spacer
- HFC's (maybe)
- Tune (maybe)
- OEM splash guards
- OEM shift ****
- Repaint left side and front bumper
- Retint driver's side
- Drivers side actuator

Maintenence
- Plugs
- Fluids - trans, diff, power steering

 

Stance GR+ and VS-XX Rims.

 

wheels.

 

Another item off the list baby

 

Air Bags
CS Rear
Work Vs-XX
Maybe New Front End?
Impulse Side Skirts
Berks HFC
HikkataDori Trunk

 

UPDATED
No more wheel gap- Done
Nismo front-installed
JWT intake-installed
JDM battery cover-installed
Gialla grill-installed
2 245/35/18 fronts installed and burned through running on different set
2 275/40/18 rears installed and burned through
Tint all round Installed
New speakers installed
Varrstoen 2.2.2 no Longer want
DD kit DVD/navi waiting to be installed
Black roof vinyl Done
Paint side mirror covers black very soon

 

UPDATED^^
So who actually got the parts they said they were going to get.

 

Got what I wanted and more

 

Did roughly half of what I intended, and a few things that weren't on my list.

Got my projectors installed. Did not bother with HID fogs - told myself I'd see how the projectors did as they came before adding anything. I'm happy with the light output so I'll probably leave them be.

Got my KW V3's on. I thought I could get away without a camber kit since the minimum drop (which is what I asked for) was only .4" - but apparently that's for the Z. So my drop is more like 3/4" to 1", which was slightly too much. Had SPC rears put on. Fronts going on early this year.

Did the RJM clutch pedal bracket.

Rebuilt my Brembo calipers with new seals.

I was bored this past week and did a ton of research and found a ton of stuff I wanted - way more than I can accomplish in 2013. Here is the list. I put maybe next do a few things that I realistically won't get to.

SPC Front Camber Kit
Adjustable Sway Bar Links (To remove pre-load off the sway bars)
Re-adjust Ride Height (Coils have now had plenty of time to settle)
GTSpec Front Strut Bar
GTSpec Lower Later Brace
Replace eccentric camber bolts with lockout bolts (since I have the SPC adjustable arms now)
GTSpec Chassis Brace (maybe)
HR Y-Pipe (or Motordyne XYZ Pipe)
MREV
Add copper TB Heater to my already installed 5/16 isothermal plenum spacer
Nismo S-Tune Exhaust (maybe)
ECU Tune
Quaife Diff, 3.7 Final Drive, Nismo Diff Cover, New Diff Bushings (maybe - either will do all at once or none)

 

Exterior

Kuruma Z front bumper
Stillen CF hood
Rear bumper (undecided)
--

 

SPC front and rear camber arm--doing this weekend!!

still trying to decide whether or not buy a new set of rims, have Varrstoen right now

 

I didn't trade the G in for a 5.0 Mustang. I'm more interested now in buying an airplane. Hopefully I'll come to my senses and pay off the mortgage instead.