Advice needed on twin turbo boost
Joined: Dec 2005
Posts: 793
Likes: 4
From: Up State NY near utica
Advice needed on twin turbo boost
I built my VQ35DE revup a little while ago and finally got a out 3000 miles onit after most two years.
I have a 05 coupe 6MT that i bought new... I now have 43,400 miles on it. I built. My motor with forged pistons 8.8:1c , eagle rods, arp bolts, than had the whole assembly balanced with my. Ati balancer and flywheel. JWT C8R cams and springs. Ported heads. I used the L-19 head studs and cometic gaskets, pathfinder cooling soultion and a 54 mm koyo radiator with dual spal fans.
So my question is how much boost do you think it can handle now . I also want to purchase a twin turbo tuner kit with either precision turbos or the garret GTX series turbos. So any input would be most apreciated as i would like to make over 600 plus at the rear wheels if my motor can handle it. Thanks a bunch as i love this site and often turn to it for ideas and
Constructive criticism. Anyone interested in dropping me email strait to my regular male you welcome to just inbox me here and illl send you my email. Again thanks
I have a 05 coupe 6MT that i bought new... I now have 43,400 miles on it. I built. My motor with forged pistons 8.8:1c , eagle rods, arp bolts, than had the whole assembly balanced with my. Ati balancer and flywheel. JWT C8R cams and springs. Ported heads. I used the L-19 head studs and cometic gaskets, pathfinder cooling soultion and a 54 mm koyo radiator with dual spal fans.
So my question is how much boost do you think it can handle now . I also want to purchase a twin turbo tuner kit with either precision turbos or the garret GTX series turbos. So any input would be most apreciated as i would like to make over 600 plus at the rear wheels if my motor can handle it. Thanks a bunch as i love this site and often turn to it for ideas and
Constructive criticism. Anyone interested in dropping me email strait to my regular male you welcome to just inbox me here and illl send you my email. Again thanks
Last edited by dreamweaver; Nov 21, 2014 at 07:48 PM. Reason: Forgot info
Thread
Thread Starter
Forum
Replies
Last Post
djreinx
Engine - Electrical
3
Dec 10, 2015 01:48 AM



