Window motor replace question - G35Driver - Infiniti G35 & G37 Forum Discussion

Nov 14, 2016 | 12:26 PM

Siciliang35

Thread Starter

Registered User

Joined: Jan 2015

Posts: 331

Likes: 14

Window motor replace question

When replacing the motor does anything need to be done beside replace the part? The window adjusts when closing the door

Nov 14, 2016 | 01:37 PM

LexD

Registered User

Joined: Mar 2015

Posts: 184

Likes: 27

From: Bay Area, CA

You will most likely need to reset the motor position when replacing the pwr. window motor.

Power Window Reset Procedure
2003-2005 G35 Coupe

Remove the Door Panel. 2003-2005 Front Door Panel
With the door open, lift UP and HOLD the Window Switch until the Window is fully closed.
Do not use the Window auto-closing function
Do not release the Switch before the Window is fully closed
Get inside the vehicle and close the door.
You need to close the door so the Door Switch is fully depressed
Press and HOLD the Window Regulator Motor Reset Switch. While holding the Reset Switch, press DOWN and HOLD the Window Switch until the Window is fully opened.
Do not use the Window auto-opening function
Do not release the Switch before the Window is fully opened
Release the Reset Switch. Then, lift UP and HOLD the Window Switch until the Window is fully closed.
Do not use the Window auto-closing function
Do not release the Switch before the Window is fully closed
Open the Door to release the Door Switch. The Window Glass should partially move down.
Re-install the Door Panel.