G35 Coupe V35 2003 - 07 Discussion about the 1st Generation V35 G35 Coupe

Misfire in Cylinder 6. Any ideas?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jan 10, 2017 | 09:50 PM
  #1  
JimmyFoos's Avatar
Thread Starter
|
Registered User
Joined: Jan 2017
Posts: 2
Likes: 0
Misfire in Cylinder 6. Any ideas?

Howdy all, new to the forums, wanted some new ideas. October-ish my 03 g35 Coupe (120k miles) started missing with the SES light after I got home from a two hour or so long trip. After running the codes, it was a misfire in Cylinder 6. I went to replace the plugs and found oil in the holes of cyl 6 and 1. Replaced the valve cover, replaced the plugs, no difference. Replaced the coil and injector, still no difference. It's not a huge noticeable miss, but is still there. It's my daily, and I've continued driving it, and it hasn't gotten any worse or better. No noticeable loss of power at all. Any ideas? Looking at what to try next. I haven't done a compression check yet, and I'm honestly afraid to cause other than an electrical issue I'm not sure what else it could be. Any ideas or tips are appreciated. Only mods to the motor are a Kinetix intake and Injen CAI.
 
Reply
Old Jan 10, 2017 | 10:43 PM
  #2  
Urbanengineer's Avatar
Super Moderator
10 Year Member
Liked
Community Favorite
iTrader: (3)
Joined: Jun 2013
Posts: 11,174
Likes: 1,045
From: OH-IO
Premier Member

Did the leaking stop?
 
Reply
Old Jan 11, 2017 | 01:11 AM
  #3  
FinnaG's Avatar
Registered User
Joined: Jan 2017
Posts: 4
Likes: 1
Its a stretch but maybe you have a vacuum leak on the kinetix manifold in the area where number 6 cylinder is at. Worth a try
 
Reply



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 09:22 PM.