G35 Coupe V35 2003 - 07 Discussion about the 1st Generation V35 G35 Coupe

ARC 2 step

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jun 24, 2017 | 07:41 PM
  #1  
Sksquibbs's Avatar
Thread Starter
|
Registered User
Joined: Jan 2017
Posts: 7
Likes: 0
From: Lexington KY
ARC 2 step

I can't get my launch control to engage for the life of me. It should be in my performance map #1 I believe... vdc off, clutch in, WOT...am I stupid or am I missing something...unless it's hidden on another map that I never use/don't have tuned... any ideas or similar issues? 2005 6mt coupe, osirus uprev and ARC platform.
 
Reply
Old Jun 25, 2017 | 03:25 AM
  #2  
LoSt180's Avatar
Premier Member
iTrader: (11)
Joined: Mar 2011
Posts: 2,796
Likes: 468
From: Maryland
Premier Member

ARC isn't assigned to a map, it's just there. Do other ARC features work?

Is the car warmed up and no check engine lights?

Make sure you're in gear also. Took me a few tries the first time, basically need to just mash the gas pedal.

Also kinda rare, but it might need to be reflashed. I've been playing with my tune lately and once or twice now ARC features didn't work. It was probably user error on my part, but flashing the rom file again seemed to fix it.
 
Reply
Old Jun 25, 2017 | 03:46 AM
  #3  
Sksquibbs's Avatar
Thread Starter
|
Registered User
Joined: Jan 2017
Posts: 7
Likes: 0
From: Lexington KY
I actaully have upstream o2 sensor codes at the moment so maybe that is the problem, I do have the ARC platform so it's good to know that it's not assigned to a specific map. I can check that off the list, I'll clear those codes and play with it, I really appreciate the help that seems like a good place to start. I'm gonna see my tuner in about a month to make sure thone sensor errors aren't representing a bad trend in my A/F. Realistically I should probably take it easy on the WOT until I know my A/F is stable through all of the RPM band anyway. Thanks again.
 
Reply
Old Jun 25, 2017 | 12:04 PM
  #4  
LoSt180's Avatar
Premier Member
iTrader: (11)
Joined: Mar 2011
Posts: 2,796
Likes: 468
From: Maryland
Premier Member

It's not working because of the check engine codes. I recently has a camshaft sensor go bad and noticed no lift shifting wasn't working. Upstream O2 is the important ones, if you have a lot of miles, they're probably just old and due for replacements.
 
Reply



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 03:34 AM.