Easy question about Motordyne spacer installation
#1
Easy question about Motordyne spacer installation
How do you know where the long, medium and short bolts go?
In the diagram it appears as though there are 12 bolts around the periphery of the spacer and 6 in the middle.
Now, the kit comes with:
11 short bolts
3 medium bolts and
4 long bolts
How are these arranged? What is the make up of the 6 bolts on top of the plenum?
This might be totally obvious once I get in there, but, it never hurts to ask first.
In the diagram it appears as though there are 12 bolts around the periphery of the spacer and 6 in the middle.
Now, the kit comes with:
11 short bolts
3 medium bolts and
4 long bolts
How are these arranged? What is the make up of the 6 bolts on top of the plenum?
This might be totally obvious once I get in there, but, it never hurts to ask first.
#3
#4
Registered User
iTrader: (1)
Join Date: Dec 2004
Location: Texas Gulf Coast
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JZ39
How do you know where the long, medium and short bolts go?
In the diagram it appears as though there are 12 bolts around the periphery of the spacer and 6 in the middle.
Now, the kit comes with:
11 short bolts
3 medium bolts and
4 long bolts
How are these arranged? What is the make up of the 6 bolts on top of the plenum?
This might be totally obvious once I get in there, but, it never hurts to ask first.
In the diagram it appears as though there are 12 bolts around the periphery of the spacer and 6 in the middle.
Now, the kit comes with:
11 short bolts
3 medium bolts and
4 long bolts
How are these arranged? What is the make up of the 6 bolts on top of the plenum?
This might be totally obvious once I get in there, but, it never hurts to ask first.
Installing new plenum bolts:
Install all the bolts with washers finger tight. The long bolts go in 9, 3, 1 and 6. Medium bolts go into
5, 2 and 4. The short bolts go into the plenums outer perimeter. Once they are installed finger tight
and aligned, tighten all the bolts in the numerical order shown below to 5 ft-lbs torque.
#5
Originally Posted by maxpower
Installing new plenum bolts:
Install all the bolts with washers finger tight. The long bolts go in 9, 3, 1 and 6. Medium bolts go into
5, 2 and 4. The short bolts go into the plenums outer perimeter. Once they are installed finger tight
and aligned, tighten all the bolts in the numerical order shown below to 5 ft-lbs torque.
Install all the bolts with washers finger tight. The long bolts go in 9, 3, 1 and 6. Medium bolts go into
5, 2 and 4. The short bolts go into the plenums outer perimeter. Once they are installed finger tight
and aligned, tighten all the bolts in the numerical order shown below to 5 ft-lbs torque.
You da man!
Thanks for the detailed info!
Thread
Thread Starter
Forum
Replies
Last Post