STEPS TO CHANGE FOG LIGHT BULB???
Registered User
Joined: Oct 2002
Posts: 437
Likes: 1
From: NW suburbs of Chicago IL.
Re: STEPS TO CHANGE FOG LIGHT BULB???
Ramo,
Zero tools needed to take out the light, but to get to it you have to turn your wheel and remove the plastic rivets holding the wheel well on. Once those are removed, peel back the wheel well and that will give you access to the light housing. A flat head screw driver will pop the rivets so you can put them back into place when you're done. Then from this point on, everything if the feel from the hand. Remove the clips that hold the H2 in place by popping them out of their clasps. Then remove the bulb housing but don't touch if you want to use those bulbs ever again! Put in the replacements and put everything back. It's a pain but worth it. I put Sylvania Superstars on my sedan a few weeks ago and it looks awesome and way brighter!
Good luck!
Tim
'03.5 G35 Sedan
Stillen Intake, 350Z duct
Hyper-Ground Kit
Eat IS300's for lunch!
Zero tools needed to take out the light, but to get to it you have to turn your wheel and remove the plastic rivets holding the wheel well on. Once those are removed, peel back the wheel well and that will give you access to the light housing. A flat head screw driver will pop the rivets so you can put them back into place when you're done. Then from this point on, everything if the feel from the hand. Remove the clips that hold the H2 in place by popping them out of their clasps. Then remove the bulb housing but don't touch if you want to use those bulbs ever again! Put in the replacements and put everything back. It's a pain but worth it. I put Sylvania Superstars on my sedan a few weeks ago and it looks awesome and way brighter!
Good luck!
Tim
'03.5 G35 Sedan
Stillen Intake, 350Z duct
Hyper-Ground Kit
Eat IS300's for lunch!
Registered User
Joined: Jun 2003
Posts: 19
Likes: 0
Re: STEPS TO CHANGE FOG LIGHT BULB???
ramo
If you have a coupe with HID lights, it's harder then just opening up the buld housing and replacing the bulb. I changed the "white" parking light bulb and had to remove a lot. In order to remove the headlight assembly you have to remove the front bumper. The carbon material inside the engine compartment is wrather hard to remove. I found it easier to remove the front bumper and remove the headlight assembly. This way you can have more room to work.
G35C (on order)
6MT DG/G
If you have a coupe with HID lights, it's harder then just opening up the buld housing and replacing the bulb. I changed the "white" parking light bulb and had to remove a lot. In order to remove the headlight assembly you have to remove the front bumper. The carbon material inside the engine compartment is wrather hard to remove. I found it easier to remove the front bumper and remove the headlight assembly. This way you can have more room to work.
G35C (on order)
6MT DG/G
Thread
Thread Starter
Forum
Replies
Last Post
Fireman07603
G35 Coupe V35 2003 - 07
16
Aug 9, 2015 06:00 PM
