Could I install 06 Splash Guards on my Own?
Registered User
Joined: Jun 2005
Posts: 181
Likes: 0
From: Granada Hills
technically, you could install them with 3M double sided tape on the rears without drilling. Just follow the factory tape that is already there, add some to the inner side of the wheel well in the splash guards.
That is an option if you don't have an electric drill or don't want to drill holes on your bumper. Took 30 minutes tops to install without drilling or having to take the wheels off. Will it hold you asking, more than plenty and more then secure. Just clean off the area where the 3M tape is going to lay down on with some dishwashing soap to strip any wax you might have around the area.
That is an option if you don't have an electric drill or don't want to drill holes on your bumper. Took 30 minutes tops to install without drilling or having to take the wheels off. Will it hold you asking, more than plenty and more then secure. Just clean off the area where the 3M tape is going to lay down on with some dishwashing soap to strip any wax you might have around the area.
Last edited by Hitman_; Apr 28, 2006 at 01:19 AM.
Just thought I'd add my two cents, here; I installed my complete set last night in about 30 minutes- that included the time taken to get the car up on the lift and pull all 4 wheels off. I had a friend helping me so he could drill while I had the guard pressed firmly in place, so that helped- but all-in-all a very easy job.
-Josh
-Josh
Joined: Jun 2002
Posts: 30,341
Likes: 9
From: Cambridge, Ont. Canada
Originally Posted by Geez35
I just purchased my guards, can't wait to get them on. The dealer only had the rears, so I have to wait till Friday to get the front splash guards.
Could I install it by myself or should I get someone to do it. The dealer is charging a $100 a pop, that’s $25 per corner, to install them. I thought that was a little pricey. I probably will end up paying them to do it if I can't find someone to do the work. I'm in SoCal btw.
Could I install it by myself or should I get someone to do it. The dealer is charging a $100 a pop, that’s $25 per corner, to install them. I thought that was a little pricey. I probably will end up paying them to do it if I can't find someone to do the work. I'm in SoCal btw.
I put mine on without much bother, or special tools.
I don't see why you couldn't. It's really no biggie, and certainly not worth $100!.
C.
Thread
Thread Starter
Forum
Replies
Last Post
FS[SoEast]: 2006 DG Coupe Part Out - mrev2, projectors, etc
bu villain
Accessories
63
Aug 25, 2016 07:14 PM
Machine Head
G35 Sedan V35 2003-06
19
Sep 4, 2015 07:22 PM
laksjd84
Exterior - Body Parts
1
Jul 24, 2015 05:12 PM