G35 Sedan V35 2003-06 Discussion about the 1st Generation V35 G35 Sedan

Weird Noise...driving me nuts

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Mar 9, 2007 | 12:47 PM
  #1  
fzr's Avatar
fzr
Thread Starter
|
Registered User
Joined: Oct 2006
Posts: 83
Likes: 1
Weird Noise...driving me nuts

I am having a weird noise when I go over bumps(not all bumps)
What happens is when I drive and go over little bumps and small crack in the road I can't hear a thing

BUT

when I travel over speed bumps I hear something is loose, sounds in the front on the drivers side.(its hard to describe that sound) I have checked my inside of the car and everything is secured I don't have things laying around. Could it be something in the wheele area?
I know I have to change my brakes but I doubt that its the brakes...I have pushed on the front of the car my shocks seem fine the car doesn't bouch up and down (which mean my shocks are ok) I assum.

This noise is driving me nuts

Anyone with a related issue?
 
Reply
Old Mar 9, 2007 | 01:08 PM
  #2  
LuXXXz's Avatar
Banned
iTrader: (1)
Joined: Apr 2005
Posts: 1,838
Likes: 1
From: Chicago
yeh i had one of those as well
its something with the compression rods i believe
theres a TSB for it
 
Reply
Old Mar 9, 2007 | 01:13 PM
  #3  
fzr's Avatar
fzr
Thread Starter
|
Registered User
Joined: Oct 2006
Posts: 83
Likes: 1
Originally Posted by LuXXXz
yeh i had one of those as well
its something with the compression rods i believe
theres a TSB for it
what is the TSB?
 
Reply
Old Mar 9, 2007 | 01:35 PM
  #4  
LuXXXz's Avatar
Banned
iTrader: (1)
Joined: Apr 2005
Posts: 1,838
Likes: 1
From: Chicago
technical service bulletin
 
Reply
Old Mar 9, 2007 | 01:57 PM
  #5  
StarChamp's Avatar
Registered User
Joined: Mar 2005
Posts: 132
Likes: 0
From: New Jersey
Originally Posted by fzr
what is the TSB?
Check edmunds.com for a list of all the TSBs applicable to your car, but that noise could be anything from a loose strut mount to the belly pan missing a bolt or two from the last oil change. It may be something as simple as the gas struts themselves; I hear mine when I go over speed bumps, and it only sounds like it's coming from the front driver's side because it's closest to the driver's seat.
 
Reply
Old Mar 9, 2007 | 03:03 PM
  #6  
fzr's Avatar
fzr
Thread Starter
|
Registered User
Joined: Oct 2006
Posts: 83
Likes: 1
StarChamp thanks for the input, I did have an oil changed done by a new tech last time since my mechanic was on vacation, I will look into that...
 
Reply
Old Mar 11, 2007 | 05:19 PM
  #7  
fzr's Avatar
fzr
Thread Starter
|
Registered User
Joined: Oct 2006
Posts: 83
Likes: 1
question I live in Canada, could the cold weather freeze the fluid in the shocks? so my shocks aren't properly working making those noises?
 
Reply
Old Mar 11, 2007 | 05:55 PM
  #8  
Noremac's Avatar
Registered User
Joined: Mar 2003
Posts: 663
Likes: 2
From: Alexandria, VA (metro DC)
Yes, your description does sound like the well-known "Compression Rod" problem. Do a search on the forum here for those words. There IS NOT a TSB on the Compression Rod defect.
 
Reply
Old Mar 11, 2007 | 08:29 PM
  #9  
6MTsdn03's Avatar
Registered User
Joined: Jan 2005
Posts: 46
Likes: 1
I have been complaining to the Infiniti dealer of Raleigh NC about as they have refused to replace the compression rods (they say this is noise characteristic to this vehicles!). I checked with the Infiniti dealer of Greensboro and they said that they dont replace the rods either; they treat the noise as maintenance/lubrication item. More specifically they spray the bushings with a silica spray. I spayed them myself and to my surprise the noise has fully disappeared, cannot get to creak under any circumstances. I dont know how long the noise will stay away but for the last 10 days I feel I drive new car.
 
Reply
Old Mar 12, 2007 | 08:41 AM
  #10  
Noremac's Avatar
Registered User
Joined: Mar 2003
Posts: 663
Likes: 2
From: Alexandria, VA (metro DC)
Originally Posted by 6MTsdn03
I spayed them myself and to my surprise the noise has fully disappeared, cannot get to creak under any circumstances.
Congrats. Maybe you could post a little DIY instruction on this. What brand lubicant did you use? Where did you apply it? How much? Did you lift the car, or just spray from the wheel well, etc?

My experience has been that when the dealer lubricated the bushings, it only had a little effect, and even that quickly disappeared (within 1-2 days).
 
Reply
Old Mar 12, 2007 | 09:59 AM
  #11  
kvangil's Avatar
Registered User
Joined: Dec 2006
Posts: 1,281
Likes: 1
From: Aurora, IL
I had the same problem too just last week. Took it to the dealer and per the service invoice, they lubricated and cleaned the "tension rod". It was done under warranty...
 
Reply
Old Mar 12, 2007 | 02:34 PM
  #12  
fzr's Avatar
fzr
Thread Starter
|
Registered User
Joined: Oct 2006
Posts: 83
Likes: 1
yeah first I will do my front brakes so the dealer can't give me exuses that its coming from the brakes, then I will take it to the dealer...
 
Reply
Old Mar 12, 2007 | 07:38 PM
  #13  
6MTsdn03's Avatar
Registered User
Joined: Jan 2005
Posts: 46
Likes: 1
Originally Posted by Noremac
Congrats. Maybe you could post a little DIY instruction on this. What brand lubicant did you use? Where did you apply it? How much? Did you lift the car, or just spray from the wheel well, etc?

My experience has been that when the dealer lubricated the bushings, it only had a little effect, and even that quickly disappeared (within 1-2 days).
Here is how I did it: I used Heavy Duty Silicone Spray made by CRC. I had bought it few months back from Wal-Mart I believe just to have it around as a general purpose no petroleum based lubricant; no intention to use it for the bushings; I dont think you want to use a spray that contains petroleum oils on rubber; I believe 3M has something similar. I raised both front wheels using 2 jacks so that I can turn the wheels left and right; I didnt remove them. I freely sprayed the compression bushings that are attached to the frame from the top/sides and the bottom bolt, then I sprayed the bushing that connected to the wheel/suspension; I turned the wheel left and right and made sure that I sprayed them all around and turned the wheels left and right few more times to make sure the liquid penetrated properly. Moved to the other (right) wheel and repeated the process. After half an hour I took the car for a spin and could not believe that it was absolutely quite. I lubricated them on 3/1, knock on wood it is perfect so far (3/12).
 
Reply
Old Mar 28, 2007 | 03:35 PM
  #14  
fzr's Avatar
fzr
Thread Starter
|
Registered User
Joined: Oct 2006
Posts: 83
Likes: 1
Alright my problem is SOLVED no more noise, the dealer replaced

Front Compression Rods Left & Right
+
Front & Rear Stabilizer Links

All done under warranty

woho car feels more stiff now too...
 
Reply
Old Mar 28, 2007 | 03:37 PM
  #15  
vaughn6mt's Avatar
Registered User
iTrader: (1)
Joined: Mar 2007
Posts: 287
Likes: 0
Just had 2 creaks done via TSB. GJ

Gotta love the double threads
 
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 08:13 AM.