Then you have no one to blame but yourself.

 

hey great job.
just got a question for you, i see that your fog light(light under our headlights) has a blueish tint to it. Did you switch out your oem fog lights? HID's or wanna be HID's? thanks

thanks.

 

I switched my fog bulb out with this one

http://www.shopatron.com/product/pro...PIA15224/353.0

 

PIAA n philips are good choices....

 

do you guys know what size the bulb is for our fogs?
also im looking for a light that is cloest to HID(super white) but dont want to pay the price for hid's. any recommendations? where to purchase? thanks

 

Did you click on the link I posted? The bulbs are "H4"s for the fogs.

 

Chris, what are you doing up at 2:00am on driver!

 

I'm nearly finished with the demon eye install for the AAC kit. The instructions say to "thread the wires (from inside the housing) behind the reflectors and out the 'parking light' hole in the clearance strip." Being that there is a bulb and socket in the clearance strip, does anyone know how we are to put the wires through?

In other words, how did you guys run the wires from inside the sealed headlamp housing to the outside where the converters are? Thanks a bunch.

 

I drilled a small hole in mine and put them through. Then i put a bunch of silicon on the hole to seal them up. I talked to a guy at ACC and that is what he said to do. So far no problems. If you need anymore just pm me.

 

I drilled a small hole for each wire and forced them through then used silicone on each side of the hole.

 

can you paint your headlights black if you don't have projectors?

 

of course ^

 

even the headlight housing part? like where the actual lights go?

don't know what its called

 

ooo chance to post a pic!

 

I used PIAA Super Plasma GTX H4 Bulbs for my fogs and they seem to match very well. They are 5000k bulbs. I got them on ebay for about $55.