Intelligent Key went for a wash cycle :)
Intelligent Key went for a wash cycle :)
Hey Fellas,
I was in a hurry and loaded my dirty laundry into the washer not knowing my key is still in my jean pocket. After the wash cycle, I pull out the clothes and the thing drops in front of my face
as I took the last few pieces!
So I take it apart and let it dry out in the hot sun for an hour. I popped a new battery on, replace the cover and the cars alarm started going went off!!!
So what do you guys think of the chances that I can still fix this?
I was in a hurry and loaded my dirty laundry into the washer not knowing my key is still in my jean pocket. After the wash cycle, I pull out the clothes and the thing drops in front of my face
as I took the last few pieces!So I take it apart and let it dry out in the hot sun for an hour. I popped a new battery on, replace the cover and the cars alarm started going went off!!!
So what do you guys think of the chances that I can still fix this?
...
I have the same thinking...but you know inside it is full of small electronics that are not meant to be soaked in water.
Anyhow, I have let it dry for longer and tried it again. I popped the battery back in and no sound from the car. Must be dead completely now. But wait...I tried to lock it and I heard the horn!!!
Now, question is, how long would it last since the components may have been compromised?
Anyhow, I have let it dry for longer and tried it again. I popped the battery back in and no sound from the car. Must be dead completely now. But wait...I tried to lock it and I heard the horn!!!
Now, question is, how long would it last since the components may have been compromised?
Originally Posted by express705
i dont see why not... the alarm went off so something must be working. maybe it needs to be reset.
not sure what u call it over there but take it apart and spray the board with some contact cleaner or WD40 to prevent corrosion. If you apply it quickly enough u might jst have a chance. We use it to save water damaged mobile phones.
Trending Topics
I have WD40, you think it will work also like a contact cleaner?
Wouldn't it short circuit anything?
Wouldn't it short circuit anything?
Originally Posted by n15m0
not sure what u call it over there but take it apart and spray the board with some contact cleaner or WD40 to prevent corrosion. If you apply it quickly enough u might jst have a chance. We use it to save water damaged mobile phones.
I hope mine works longer as I don 't want to spend 300 bucks on a replacement from the dealer.
I suppose I could get a remote w/o the key and just have the dealer program it.
I suppose I could get a remote w/o the key and just have the dealer program it.
Originally Posted by azzkikr
that what happen to my 1st one. never worked again after it dried. dealer wanted 300+ for a replacement. so now im using my spare.
Last edited by eric300zx; May 27, 2008 at 12:26 AM.
Yeah, been looking at Ebay. I have only found one so far and is used for
40bucks. I'm going to wait for a new one with a good price...
40bucks. I'm going to wait for a new one with a good price...
Originally Posted by miltoda
You can get a remote off of ebay for like 25-30 bucks and program it yourself.
Hmmm, they are pretty good eh! I think the Nissan models use a different remote though...
Originally Posted by darrick
i have washed mine for 07 maxima 3 or 4 times i have always been able to dry mine out .
Originally Posted by darrick
i have washed mine for 07 maxima 3 or 4 times i have always been able to dry mine out .


