GOT MY WHEELS!!
#16
Re: GOT MY WHEELS!!
Clint,
Thanks Bro!! Yep! My Stoptechs should be coming in next week..Still waiting for the Fuji shipment to come in..So what's next for us? [img]/w3timages/icons/smile.gif[/img]
6MT Ivory/Willow>>Nismo OEM Kit>>Premium Package>>XM
"Is simplicity best or simply the easiest"
Thanks Bro!! Yep! My Stoptechs should be coming in next week..Still waiting for the Fuji shipment to come in..So what's next for us? [img]/w3timages/icons/smile.gif[/img]
6MT Ivory/Willow>>Nismo OEM Kit>>Premium Package>>XM
"Is simplicity best or simply the easiest"
#18
G Kreuzer
iTrader: (1)
Join Date: Jun 2003
Location: Southern California
Posts: 2,812
Likes: 0
Received 0 Likes
on
0 Posts
Re: GOT MY WHEELS!!
Reggie,
The only other thing I would highly recommend, if you haven't gotten them yet, is the low profile (aka 'tuner' style) wheel lug nuts and locks. They are much slimmer compare to the stocker nuts, which prevents the side wall from being scraped. Mine were badly scorned from such a feat. Some also come in 'splined' layout rather than the typical 'hex' face, making it practically impossible to slip and strip/round-off the nut faces by accident.
The lug nuts I got were made by Gorilla (12M x 1.25, cone seat, 19mm tuner style, spline drive). You can get them at America's Tires. Unfortunately, Gorilla does not make low-profile wheel locks (their normal style lock was what scrape the heck out of mine). I ended up with a similarly profiled locks by McGard (model 24154). It is a non-splined type, however.
BTW, are you going with 13" or 14" Stoptechs? Both front and rear? I'm still waiting for Stoptech to release the FULL 13" kit.
Clint (THX723)
The only other thing I would highly recommend, if you haven't gotten them yet, is the low profile (aka 'tuner' style) wheel lug nuts and locks. They are much slimmer compare to the stocker nuts, which prevents the side wall from being scraped. Mine were badly scorned from such a feat. Some also come in 'splined' layout rather than the typical 'hex' face, making it practically impossible to slip and strip/round-off the nut faces by accident.
The lug nuts I got were made by Gorilla (12M x 1.25, cone seat, 19mm tuner style, spline drive). You can get them at America's Tires. Unfortunately, Gorilla does not make low-profile wheel locks (their normal style lock was what scrape the heck out of mine). I ended up with a similarly profiled locks by McGard (model 24154). It is a non-splined type, however.
BTW, are you going with 13" or 14" Stoptechs? Both front and rear? I'm still waiting for Stoptech to release the FULL 13" kit.
Clint (THX723)
#19
Re: GOT MY WHEELS!!
Clint,
I did go for the McGard..Gorilla are just too big and didnt want to scratch my wheels..McGard looks clean and I'm diggin them..Regarding my Stoptech, I went for the 13"s hopefully they can sell the rear kit separately when they come out..
Reggie
6MT Ivory/Willow>>Nismo OEM Kit>>Premium Package>>XM
"Is simplicity best or simply the easiest"
I did go for the McGard..Gorilla are just too big and didnt want to scratch my wheels..McGard looks clean and I'm diggin them..Regarding my Stoptech, I went for the 13"s hopefully they can sell the rear kit separately when they come out..
Reggie
6MT Ivory/Willow>>Nismo OEM Kit>>Premium Package>>XM
"Is simplicity best or simply the easiest"
#20
Re: GOT MY WHEELS!!
Very sharp. Looks great. Good luck with them.
04 Sedan, Twilight Blue, Graphite int. 18 inch coupe wheels.http://www.pbase.com/twbg35sdn
04 Sedan, Twilight Blue, Graphite int. 18 inch coupe wheels.http://www.pbase.com/twbg35sdn
#23
#24
Re: GOT MY WHEELS!!
Thread
Thread Starter
Forum
Replies
Last Post
carid
Wheels & Tires-Vendor
0
07-20-2015 08:57 AM
RAVSPEC
Wheels & Tires-Vendor
0
07-16-2015 01:58 AM