2nd gear stall at redline
 

Did anyone had this problem in the auto? I use the manumatic shift today, and hit the 2nd gear to redline. However, it starts to stall, and eventually comes back when the rpm lower than the redline. anyone, please help...

Thanks,
Buche

Nothing Turns You On More Than The "hotGspot"

Re: 2nd gear stall at redline
 

You hit the rev limiter.
It's there to protect the engine from over reving

<font color=blue>04 Silverstone G35, 5AT, Prem, Aero
ES100 225/45-18 front 245/40-18 rear
Borla TD, Z-tube, Eibach, 35%Tints</font color=blue>

Re: 2nd gear stall at redline
 

IC...thanks...

Nothing Turns You On More Than The "hotGspot"

Re: 2nd gear stall at redline
 

I freaked out the first time I hit the rev-limiter. Took it all the
way past redline and the rpm just dropped like a rock.
Sure is a nice safety feature.

2003 TwBlue 5AT Sedan, sunroof,
Graphite Leather, splashguards, HKS exhaust,
14 wire Grounding kit, 350Z duct, Stillen CAI
Underbody rear diffusers, Drilled alum pedals

Re: 2nd gear stall at redline
 

You will find the sweet spot for shift points with time & practice.
The difficult part is that the shift seems to lag/delay more with load.
Generally I find that under WOT you need to shift at aprox 500 revs sooner than target shift point.
e.g.Under WOT to hit a 6500 shift point, make your shift @ 6000 rpm

<font color=blue>04 Silverstone G35, 5AT, Prem, Aero
ES100 225/45-18 front 245/40-18 rear
Borla TD, Z-tube, Eibach, 35%Tints</font color=blue>