warranty work done - ballast, ignitors, and fuel sending units replaced
Joined: Jun 2008
Posts: 142
Likes: 0
From: riverside, ca
warranty work done - ballast, ignitors, and fuel sending units replaced
first problem, i had my fuel sending units replaced due to the face the fuel gauge was giving an inaccurate reading. the fuel gauge needle would erratically move up and down. parts - fuel sending units x 2 = $200 (@ 100 apiece), labor - $230. total so far $430.
next problem my HID headlights stopped working. i bought PIAA 6600k d2r and used DIY here on g35driver (highly reccomend it took my about 30-40 mins. i took the front wheels off, thats why it took me longer.) lights still did not work. took to stealership and found out it was the ballasts and ignitirs (controll untis). parts - control units x 2 = $770 ( @ $335 apiece), labor - $150. total - $920. i also had them install my PIAA d2r. i also installed PIAA 2500k H4 for my foglights.
grand total came up to $1350. warranty covered everything but $110. i thought i would share my experience if you would have a similar problem happens to you. what's your opinion and experience.
next problem my HID headlights stopped working. i bought PIAA 6600k d2r and used DIY here on g35driver (highly reccomend it took my about 30-40 mins. i took the front wheels off, thats why it took me longer.) lights still did not work. took to stealership and found out it was the ballasts and ignitirs (controll untis). parts - control units x 2 = $770 ( @ $335 apiece), labor - $150. total - $920. i also had them install my PIAA d2r. i also installed PIAA 2500k H4 for my foglights.
grand total came up to $1350. warranty covered everything but $110. i thought i would share my experience if you would have a similar problem happens to you. what's your opinion and experience.
Thread
Thread Starter
Forum
Replies
Last Post
