When and how much? PM me.

 

This also looks like it will fit:

Ichiba G37 Y pipe:



http://www.hpautoworks.com/index.php...oducts_id=4540

 

pm'd an offer.

 

im guessing any g37 Y pipe might be able to fit..i jus want somethin that will flow better then a stock HR if its available..i only want to do my exhaust once...if i get a stock HR and i find out i could of got somethin better it would really **** me off and cause me to have to change it

 

here is a 370z y pipe on ebay
http://cgi.ebay.com/ebaymotors/2010-...#ht_684wt_1167

 

wouldnt the ichiba flow better and give more gains^^^^^

 

Yeah, especially if you're running a 3" Y-back. The only thing is i can't find much info on it, even on myg37.com.

 

i was gonna do test pipes ..hopefully that ichiba y pipe stock mid pipe and hks axle back muffler

 

Check out the Kakumei y-pipe for the fx35 awd. It should probably fit. It has a 2.25" inlet and 3" outlet.

 

ya that looks like a possibility too...

 

So there is
Ichiba which is 2.5" to 3"
http://cgi.ebay.com/ebaymotors/ws/eB...d=190290415003

Kakumei which is 2.25" to 3"
http://cgi.ebay.com/ebaymotors/ws/eB...d=360211154825

JDM which is 2.5" to 3"
http://cgi.ebay.com/ebaymotors/ws/eB...d=280513710453

350z OEM HR which is 2.0" to 2.5"
https://g35driver.com/forums/attachm...3-g35-xy-2.jpg

G37 OEM HR which is 1.75" to 2.5"
http://media.photobucket.com/image/g...G/370z-181.jpg

G35X OEM DE 2004.5-2006 which is 2" to 2.35"(HR Look-alike[made this way to clear transfer case], no hockey pucks)

FX35 AWD OEM DE (HR Look-alike[made this way to clear transfer case], no hockey pucks)

 

do you really see gains out of a Y pipe from a OEM 370z/G37 on a G35 or is it just for sound?

 

I didnt feel squat when I put on my HR y-pipe. Awd y-pipes already have similar bends to the HR y-pipe(04.5-06) so maybe that had to do with it.

The rwd guys claim they feel an increase in power.

One thing for sure though is that it changes the sound. No in-cabin noise, you can only hear from the outside.

 

if i keep the stock mid the opening are diff sizes..will that cause a leak or do the end peices (forgot name) where the bolts go through match up and the inside is diff?..or .35 inches isnt really going to make a difference

 

im sure they will bolt up..my main concern is clearing my front differential