G35Driver - Infiniti G35 & G37 Forum Discussion

G35Driver - Infiniti G35 & G37 Forum Discussion (https://g35driver.com/forums/)
-   G35 Sedan V35 2003-06 (https://g35driver.com/forums/g35-sedan-v35-2003-06-15/)
-   -   CF Rear View Mirror's (https://g35driver.com/forums/g35-sedan-v35-2003-06/338110-cf-rear-view-mirrors.html)

thaipitbull May 21, 2010 10:34 AM

CF Rear View Mirror's
 
5 Attachment(s)
So, I'm in Japan and trying to find mods for my V35. Just thought i would share these since I haven't seen a post before. CF clip on stock R.V. Mirror and replacement CF R.V. Mirrors (hardware available to do swap) what do you guys think?
A:Clip on(in black or sliver)
Attachment 120675Attachment 120679
B:Swap
Attachment 120676Attachment 120677
Also... CF side mirror clip-on's (only for sedans)
Attachment 120678

Jay'Z May 21, 2010 10:38 AM

Nice! How much for black clip on? This fit a Z?

kRzY May 21, 2010 11:33 AM

my buddy had these on his s2k. Looks kinda funny for a daily but he semmed to like it.

canucklehead May 21, 2010 11:35 AM

how much HP do they add? or how many lbs do they shave off the curb weight?

thaipitbull May 21, 2010 11:43 AM

The G and Z use the same mirrors, but there is a slight difference in the style of mirror (look at the bottom where the tab is to flip for bright lights, and the neck opening at the top) It depends on the factory mirror number
i.e:
ICHIKOH  I・E13・011427,
ICHIKOH 8294 I, e13・02*0837, E13・010837 (these have a hole cut out on the back for a sensor)
or
Donnelly USA / MODEL 240 (I・E8・011681)

They're about $110 with shipping

thaipitbull May 21, 2010 11:49 AM

My wife thinks it's cute and matches the CF engine cover, lol

Mustang5L5 May 21, 2010 05:35 PM

I just want the jdm mirrors with the turn signal and fold in when I turn the car off.

thaipitbull May 21, 2010 08:04 PM

1 Attachment(s)

Originally Posted by Mustang5L5 (Post 5118624)
I just want the jdm mirrors with the turn signal and fold in when I turn the car off.

ya, i do to. but even here they are hard to get. these are going for like 300.00
they are the only ones that I can find here with-out going to the dealer...:mad:
Attachment 120697

thaipitbull May 21, 2010 08:08 PM

1 Attachment(s)
and for those who are wondering here is where you find the factory number.
Attachment 120698

Team Punisher May 22, 2010 07:53 AM

Not bad...

MDV35 May 22, 2010 08:37 PM


Originally Posted by thaipitbull (Post 5118921)
ya, i do to. but even here they are hard to get. these are going for like 300.00
they are the only ones that I can find here with-out going to the dealer...:mad:
Attachment 120697

i would payed that much for those... how do i buy them???

s0nicstr1fe May 23, 2010 08:34 AM


Originally Posted by canucklehead (Post 5117962)
how much HP do they add? or how many lbs do they shave off the curb weight?

dood... it adds more than my NOS stickers!

s0nicstr1fe May 23, 2010 08:38 AM

Wait...

300 f'in dollars For a piece Of CARBON FIBER your probably NEVER going to look at?

By all means... if you have a good job, its your car...

I guess you can add those COOL brembo brake covers they sell on ebay that glue onto your calipers too!

Dude... save another 200 and flash your ECU... or get an intake manifold spacer...

Sh1t, send me your Throttle body and I'll port & polish it for you for $200.

seriously... it isnt even JDM...

EDIT: my bad, that was 300 for the rear views.
Still.. 110 for the clip on CF is kinda... ehh..


----------------------------------------------

If anyone has extra set of rear views, send them my way. I'll make a DIY on how to wire your own LED's

kennymo May 23, 2010 08:52 AM

how about you just do it on your own mirrors

thaipitbull May 23, 2010 09:19 AM


Originally Posted by s0nicstr1fe (Post 5120921)
Wait...

300 f'in dollars For a piece Of CARBON FIBER your probably NEVER going to look at?

By all means... if you have a good job, its your car...

I guess you can add those COOL brembo brake covers they sell on ebay that glue onto your calipers too!

Dude... save another 200 and flash your ECU... or get an intake manifold spacer...

Sh1t, send me your Throttle body and I'll port & polish it for you for $200.

seriously... it isnt even JDM...

EDIT: my bad, that was 300 for the rear views.
Still.. 110 for the clip on CF is kinda... ehh..


----------------------------------------------

If anyone has extra set of rear views, send them my way. I'll make a DIY on how to wire your own LED's

nonono, its 300 for the custom LED side mirrors with color match paint. not the CF covers.
they are made by a guy in Japan, so i would say it's more JDM than a lot of things i see on the market that says "JDM" in the States that i can't even find here...:icon43:


All times are GMT -4. The time now is 04:42 AM.


© 2026 MH Sub I, LLC dba Internet Brands