CF Rear View Mirror's
Joined: May 2010
Posts: 30
Likes: 0
From: Fujieda, Japan
CF Rear View Mirror's
So, I'm in Japan and trying to find mods for my V35. Just thought i would share these since I haven't seen a post before. CF clip on stock R.V. Mirror and replacement CF R.V. Mirrors (hardware available to do swap) what do you guys think?
A:Clip on(in black or sliver)


B:Swap


Also... CF side mirror clip-on's (only for sedans)
A:Clip on(in black or sliver)


B:Swap


Also... CF side mirror clip-on's (only for sedans)
Last edited by thaipitbull; May 21, 2010 at 11:47 AM.
Joined: May 2010
Posts: 30
Likes: 0
From: Fujieda, Japan
The G and Z use the same mirrors, but there is a slight difference in the style of mirror (look at the bottom where the tab is to flip for bright lights, and the neck opening at the top) It depends on the factory mirror number
i.e:
ICHIKOH I・E13・011427,
ICHIKOH 8294 I, e13・02*0837, E13・010837 (these have a hole cut out on the back for a sensor)
or
Donnelly USA / MODEL 240 (I・E8・011681)
They're about $110 with shipping
i.e:
ICHIKOH I・E13・011427,
ICHIKOH 8294 I, e13・02*0837, E13・010837 (these have a hole cut out on the back for a sensor)
or
Donnelly USA / MODEL 240 (I・E8・011681)
They're about $110 with shipping
Last edited by thaipitbull; May 21, 2010 at 11:49 AM.
Trending Topics
ya, i do to. but even here they are hard to get. these are going for like 300.00
they are the only ones that I can find here with-out going to the dealer...
Attachment 120697
they are the only ones that I can find here with-out going to the dealer...

Attachment 120697
Wait...
300 f'in dollars For a piece Of CARBON FIBER your probably NEVER going to look at?
By all means... if you have a good job, its your car...
I guess you can add those COOL brembo brake covers they sell on ebay that glue onto your calipers too!
Dude... save another 200 and flash your ECU... or get an intake manifold spacer...
****, send me your Throttle body and I'll port & polish it for you for $200.
seriously... it isnt even JDM...
EDIT: my bad, that was 300 for the rear views.
Still.. 110 for the clip on CF is kinda... ehh..
----------------------------------------------
If anyone has extra set of rear views, send them my way. I'll make a DIY on how to wire your own LED's
300 f'in dollars For a piece Of CARBON FIBER your probably NEVER going to look at?
By all means... if you have a good job, its your car...
I guess you can add those COOL brembo brake covers they sell on ebay that glue onto your calipers too!
Dude... save another 200 and flash your ECU... or get an intake manifold spacer...
****, send me your Throttle body and I'll port & polish it for you for $200.
seriously... it isnt even JDM...
EDIT: my bad, that was 300 for the rear views.
Still.. 110 for the clip on CF is kinda... ehh..
----------------------------------------------
If anyone has extra set of rear views, send them my way. I'll make a DIY on how to wire your own LED's
Last edited by s0nicstr1fe; May 23, 2010 at 08:43 AM.
Joined: May 2010
Posts: 30
Likes: 0
From: Fujieda, Japan
Wait...
300 f'in dollars For a piece Of CARBON FIBER your probably NEVER going to look at?
By all means... if you have a good job, its your car...
I guess you can add those COOL brembo brake covers they sell on ebay that glue onto your calipers too!
Dude... save another 200 and flash your ECU... or get an intake manifold spacer...
****, send me your Throttle body and I'll port & polish it for you for $200.
seriously... it isnt even JDM...
EDIT: my bad, that was 300 for the rear views.
Still.. 110 for the clip on CF is kinda... ehh..
----------------------------------------------
If anyone has extra set of rear views, send them my way. I'll make a DIY on how to wire your own LED's
300 f'in dollars For a piece Of CARBON FIBER your probably NEVER going to look at?
By all means... if you have a good job, its your car...
I guess you can add those COOL brembo brake covers they sell on ebay that glue onto your calipers too!
Dude... save another 200 and flash your ECU... or get an intake manifold spacer...
****, send me your Throttle body and I'll port & polish it for you for $200.
seriously... it isnt even JDM...
EDIT: my bad, that was 300 for the rear views.
Still.. 110 for the clip on CF is kinda... ehh..
----------------------------------------------
If anyone has extra set of rear views, send them my way. I'll make a DIY on how to wire your own LED's
they are made by a guy in Japan, so i would say it's more JDM than a lot of things i see on the market that says "JDM" in the States that i can't even find here...




