So, I'm in Japan and trying to find mods for my V35. Just thought i would share these since I haven't seen a post before. CF clip on stock R.V. Mirror and replacement CF R.V. Mirrors (hardware available to do swap) what do you guys think?
A:Clip on(in black or sliver)


B:Swap


Also... CF side mirror clip-on's (only for sedans)

A:Clip on(in black or sliver)


B:Swap


Also... CF side mirror clip-on's (only for sedans)

Registered User
how much HP do they add? or how many lbs do they shave off the curb weight?
The G and Z use the same mirrors, but there is a slight difference in the style of mirror (look at the bottom where the tab is to flip for bright lights, and the neck opening at the top) It depends on the factory mirror number
i.e:
ICHIKOH I・E13・011427,
ICHIKOH 8294 I, e13・02*0837, E13・010837 (these have a hole cut out on the back for a sensor)
or
Donnelly USA / MODEL 240 (I・E8・011681)
They're about $110 with shipping
i.e:
ICHIKOH I・E13・011427,
ICHIKOH 8294 I, e13・02*0837, E13・010837 (these have a hole cut out on the back for a sensor)
or
Donnelly USA / MODEL 240 (I・E8・011681)
They're about $110 with shipping
My wife thinks it's cute and matches the CF engine cover, lol
Registered User
I just want the jdm mirrors with the turn signal and fold in when I turn the car off.
Registered User
Quote:
they are the only ones that I can find here with-out going to the dealer...
Attachment 120697
i would payed that much for those... how do i buy them???Originally Posted by thaipitbull
ya, i do to. but even here they are hard to get. these are going for like 300.00they are the only ones that I can find here with-out going to the dealer...

Attachment 120697
Registered User
Quote:
dood... it adds more than my NOS stickers!Originally Posted by canucklehead
how much HP do they add? or how many lbs do they shave off the curb weight?
Registered User
Wait...
300 f'in dollars For a piece Of CARBON FIBER your probably NEVER going to look at?
By all means... if you have a good job, its your car...
I guess you can add those COOL brembo brake covers they sell on ebay that glue onto your calipers too!
Dude... save another 200 and flash your ECU... or get an intake manifold spacer...
****, send me your Throttle body and I'll port & polish it for you for $200.
seriously... it isnt even JDM...
EDIT: my bad, that was 300 for the rear views.
Still.. 110 for the clip on CF is kinda... ehh..
----------------------------------------------
If anyone has extra set of rear views, send them my way. I'll make a DIY on how to wire your own LED's
300 f'in dollars For a piece Of CARBON FIBER your probably NEVER going to look at?
By all means... if you have a good job, its your car...
I guess you can add those COOL brembo brake covers they sell on ebay that glue onto your calipers too!
Dude... save another 200 and flash your ECU... or get an intake manifold spacer...
****, send me your Throttle body and I'll port & polish it for you for $200.
seriously... it isnt even JDM...
EDIT: my bad, that was 300 for the rear views.
Still.. 110 for the clip on CF is kinda... ehh..
----------------------------------------------
If anyone has extra set of rear views, send them my way. I'll make a DIY on how to wire your own LED's
Quote:
300 f'in dollars For a piece Of CARBON FIBER your probably NEVER going to look at?
By all means... if you have a good job, its your car...
I guess you can add those COOL brembo brake covers they sell on ebay that glue onto your calipers too!
Dude... save another 200 and flash your ECU... or get an intake manifold spacer...
****, send me your Throttle body and I'll port & polish it for you for $200.
seriously... it isnt even JDM...
EDIT: my bad, that was 300 for the rear views.
Still.. 110 for the clip on CF is kinda... ehh..
----------------------------------------------
If anyone has extra set of rear views, send them my way. I'll make a DIY on how to wire your own LED's
nonono, its 300 for the custom LED side mirrors with color match paint. not the CF covers.Originally Posted by s0nicstr1fe
Wait...300 f'in dollars For a piece Of CARBON FIBER your probably NEVER going to look at?
By all means... if you have a good job, its your car...
I guess you can add those COOL brembo brake covers they sell on ebay that glue onto your calipers too!
Dude... save another 200 and flash your ECU... or get an intake manifold spacer...
****, send me your Throttle body and I'll port & polish it for you for $200.
seriously... it isnt even JDM...
EDIT: my bad, that was 300 for the rear views.
Still.. 110 for the clip on CF is kinda... ehh..
----------------------------------------------
If anyone has extra set of rear views, send them my way. I'll make a DIY on how to wire your own LED's
they are made by a guy in Japan, so i would say it's more JDM than a lot of things i see on the market that says "JDM" in the States that i can't even find here...

