G35Driver - Infiniti G35 & G37 Forum Discussion

G35Driver - Infiniti G35 & G37 Forum Discussion (https://g35driver.com/forums/)
-   G35 Sedan V35 2003-06 (https://g35driver.com/forums/g35-sedan-v35-2003-06-15/)
-   -   Plenum Whistle (https://g35driver.com/forums/g35-sedan-v35-2003-06/338762-plenum-whistle.html)

ECG35 05-27-2010 12:38 AM

Plenum Whistle
 
Just installed a 5/8 plenum spacer, and Im getting a very high pitched whistle just as the car is in idle. Any ideas? Im going to try loosening the screws might be too tight causing the spacer to warp, but suggestions are welcomed.

Anyone else run into this problem?

drkay 05-27-2010 12:44 AM

did you use a torque wrench? the outside bolts must be torqued to 100 ft lbs and the inside bolts must be 80 ft lbs. i think that would be the first place to start if you didn't use a torque wrench. but yeah if the bolts are too tight you will warp the spacer and get the plenum whistle

2004 G35x, Motordyne 5/16" Copper Iso Thermal Plenum Spacer, Z-Tube with Pop-Charger, NGK Iridium, Mobil 1 Synthetic, EBC Green Stuff Pads with EBC 3GD Sport Rotors, Brake Master Cylinder Stiffener, OEM Spoiler, Grounding Kit, 235/50/17

TwoFiveBravo 05-27-2010 12:46 AM

I had no problems with my 5/16. did you tighten them down in order? Maybe one isnt tightened?

GF-4D-G35 05-27-2010 12:49 AM

DO NOT torque to 100 ft lbs, it is INCH lbs and there is a specific order to do it in

http://www.motordyneengineering.com/manual.pdf

thescreensavers 05-27-2010 12:49 AM


Originally Posted by drkay (Post 5129127)
did you use a torque wrench? the outside bolts must be torqued to 100 ft lbs and the inside bolts must be 80 ft lbs. i think that would be the first place to start if you didn't use a torque wrench. but yeah if the bolts are too tight you will warp the spacer and get the plenum whistle



^ INCH POUNDS!

Its different from foot pounds

100 inch pounds is 8.33 Foot pounds.

G SEDAN 05-27-2010 12:54 AM

while the other points are valid,

you probably need to get a new gasket

drkay 05-27-2010 01:18 AM

oh crap. . . I mis typed. . In lbs!

SxExCx 05-27-2010 01:35 AM

I am willing to bet that the rubber surround for the oil filler neck is wedged between the plenum and the spacer.

Tollboothwilley 05-27-2010 01:46 AM

what plenum spacer is it?

You need to retorque the bolts down. be careful, some people have overtightened and caused much more serious problems...

ccc123pm 05-27-2010 07:36 AM

does it sound something like this?


Gusc35 05-27-2010 08:11 AM

^
lmao

OKStateG35 05-27-2010 09:50 AM


Originally Posted by ccc123pm (Post 5129466)
does it sound something like this?

http://www.youtube.com/watch?v=n79jSzKA0L8

I can't watch YouTube videos at work, but please tell me that is the whistling muffler tips video with Bub Rub and Lil' Sis.

It's like an alarm clock...woo wooooo!

GThirty-Kevin 05-27-2010 10:16 AM


Originally Posted by OKStateG35 (Post 5129612)
I can't watch YouTube videos at work, but please tell me that is the whistling muffler tips video with Bub Rub and Lil' Sis.

It's like an alarm clock...woo wooooo!

^ Haha, I love that video! The best is when he almost drills a stop sign and a parked car while trying to show off by speeding away at the end.


"Iss only in da moaning, you should be up cooking brefass o' somethin'."

OKStateG35 05-27-2010 10:26 AM


Originally Posted by GThirty-Kevin (Post 5129649)
^ Haha, I love that video! The best is when he almost drills a stop sign and a parked car while trying to show off by speeding away at the end.


"Iss only in da moaning, you should be up cooking brefass o' somethin'."

Haha, I was just recently introduced to it's greatness by my wife. I love it.

GThirty-Kevin 05-27-2010 10:57 AM


Originally Posted by OKStateG35 (Post 5129671)
Haha, I was just recently introduced to it's greatness by my wife. I love it.

After seeing that video it totally makes me want to get one of those whistle tips. Only two problems:

1. Only available in Oakland
2. Hurts performance because "Iss juss fo' decoration"


All times are GMT -4. The time now is 10:18 AM.


© 2024 MH Sub I, LLC dba Internet Brands