The spacer everyone is suggesting can be found in the link below.

However, I suggest keeping an eye out in the marketplace. But, if you don't want to wait:

MD spacer - http://motordyneusa.com/index.php?op...id=9&Itemid=13

1/2 for "top gain"
5/16 for "most useable power"
Iso thermal depending on winters in your state

You can get it cheaper on amazon as well, just make sure they are authorized MotorDyne dealers like the Nismo shop a.k.a West Cov. in Cali.

 

should prolly skim through this too: https://g35driver.com/forums/g35-sed...an-thread.html

should answer a lot of your questions

 

Be careful the 100-shot of NOS doesn't blow the welds on the intake...

 

DAMN IT.

Someone beat me to it.

 

haha

 

Haha, you can joke all you want, but Nitrous is good stuff if you want cheap power. If you use it a lot, it gets pricey. There are places by me that will do bottle fills at any time of the night though...

 

It will decimate all, with about $10,000 and overnighted parts from Japan.

 

If you have a decent tuner it won't do damage... Especially not with a little 100 shot.

 

You might want to try adding the sticker that adds 5 more hp.

 

A lot of people make fun of nitrous or "NOS", but it is the cheapest way to get power.

I cannot see a full bolt-on DE making more than 280hp without cams or building the motor.

 

No faith? Pop the Hood!

VQ35DE no ****!

 

But that could blow the welds on the intake!

 

A friend of mine did nos and i think he is at 398hp when he uses it.

 

But if you have a mad scientist to rip apart the block and replace the piston rings he fried then you are good!!!!

 

Nos!!!