|
Rev problem
Ok so when I press the brake and rev up my engine it will not go past like 2000 rpm. Is anyone having this same issue or is this normal?
|
Sounds like the car is in limp mode, plug in an OBD2 scanner and see what codes are being thrown.
|
Originally Posted by cleric670
(Post 7193611)
Sounds like the car is in limp mode, plug in an OBD2 scanner and see what codes are being thrown.
see not engine light is on and it’s not driving wierd either could it still be in limp mode though? |
Originally Posted by cleric670
(Post 7193611)
Sounds like the car is in limp mode, plug in an OBD2 scanner and see what codes are being thrown.
|
Ohh so the car drives normally but ONLY goes limp mode when you are holding down the BRAKES and the THROTTLE at the same time?
Sounds like some kind of factory transmission protection to keep fools from smoking the tranny. Other 5AT owners can chime in if this is intended behavior. |
Originally Posted by cleric670
(Post 7193622)
Ohh so the car drives normally but ONLY goes limp mode when you are holding down the BRAKES and the THROTTLE at the same time?
Sounds like some kind of factory transmission protection to keep fools from smoking the tranny. Other 5AT owners can chime in if this is intended behavior. |
Does it only do this when you are powerbraking like that and does it start driving normally as soon as you release the brakes or is it locked into limp mode until you restart the car?
|
Originally Posted by cleric670
(Post 7193637)
Does it only do this when you are powerbraking like that and does it start driving normally as soon as you release the brakes or is it locked into limp mode until you restart the car?
|
Have u tried turning the traction off?
|
Originally Posted by Jonathan Sims
(Post 7193639)
everything is fine driving it. It’s only when I press the brake and give it gas is when it won’t go over 2000 rpm.
|
Originally Posted by haynV35
(Post 7193927)
Are you pressing both simultaneously? i have a 5AT and have done that to shoot off the line at a light, but have never attempted to go over 2k before letting go of the brake. I will try next time. In the mean time, try turning off VDC like someone else mentioned
I have done that to and I get the same results. It still will not go over 2k while pressing the brake and gas at the same time. The traction control can be on or off and it still won’t go over 2k. I have replaced the battery also. Since I have had the car it will not do it so I’m kinda stuck here. |
Originally Posted by Jonathan Sims
(Post 7193980)
I have done that to and I get the same results. It still will not go over 2k while pressing the brake and gas at the same time. The traction control can be on or off and it still won’t go over 2k. I have replaced the battery also. Since I have had the car it will not do it so I’m kinda stuck here.
|
But driving around you can go further than 2k rpm? just curious but are you trying to do this to do a burnout?
Also just realized i may not be the best person to assist with testing because i cut my abs fuses |
Just tried. Mine wont go over 2300 RPM.
|
Originally Posted by P_Diddy
(Post 760153)
One more note, I don't think it is possible to do a standing burnout in an auto, where you are spinning the tires in place. This is because the ECU will limit the throttle while the brake pedal is depressed.
|
| All times are GMT -4. The time now is 05:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands