Razo shift knob install
#1
#2
Registered User
iTrader: (2)
Join Date: Jul 2002
Location: Toronto, Ontario
Posts: 1,728
Likes: 0
Received 0 Likes
on
0 Posts
Re: Razo shift **** install
I have the same **** and the install is very easy. To take off the org. ****, just pull the silver base of the **** down. You will then see a "U" clip facing the radio. Pull that out and once you do, the **** comes right off as you pull up on the ****.
In terms of the Razo install, place the BOTTOM **** cover in first then slide the metal thick ring down with the all the parts it came with. Those flexi small metal peices are to protect the screws from diggin into your org. shaft. Slide the ring in and tighten the screws a lil so that the ring stays in place. Place the TOP **** cover on the white plastic shaft and from there measure the travel with pressing the **** up and down. Once you have it right, you can tighten the two lil screws and twist the BOTTOM and TOP **** cover together. It may take you a few times to perfect to the way you like it, so it's up to you.
If you need anything else, just gimme a shout.
It's still a G thang!!
In terms of the Razo install, place the BOTTOM **** cover in first then slide the metal thick ring down with the all the parts it came with. Those flexi small metal peices are to protect the screws from diggin into your org. shaft. Slide the ring in and tighten the screws a lil so that the ring stays in place. Place the TOP **** cover on the white plastic shaft and from there measure the travel with pressing the **** up and down. Once you have it right, you can tighten the two lil screws and twist the BOTTOM and TOP **** cover together. It may take you a few times to perfect to the way you like it, so it's up to you.
If you need anything else, just gimme a shout.
It's still a G thang!!
#3
#6
#7
Registered User
iTrader: (2)
Join Date: Jul 2002
Location: Toronto, Ontario
Posts: 1,728
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
#10
Re: Razo shift **** install
Thanks for the help. It was actually pretty trivial.
Take a look. I might change it for a silver one later.
https://g35driver.com/forums/showfla...sed&sb=5&part=
Take a look. I might change it for a silver one later.
https://g35driver.com/forums/showfla...sed&sb=5&part=
#12
Re: Razo shift **** install
Can you tell me what the part number is for the Razo shift **** you installed? I've been looking for it online, and Razo makes thousands of them. Did it come with the leather boot around the bottom? Do you happen to know if it would fit the Coupe automatic? Thanks!
#14
Re: Razo shift **** install
Great, Thanks for the info!
I've got one more question. My current automatic shift **** has a button on the side that you have to depress to get it into and out of "Park." The Razo's don't appear to have a button. How does that work? With the Razo's, is the button always depressed? Thanks again!
I've got one more question. My current automatic shift **** has a button on the side that you have to depress to get it into and out of "Park." The Razo's don't appear to have a button. How does that work? With the Razo's, is the button always depressed? Thanks again!