Anyone Install 05-06 Front Lip Spoiler themself?
Originally Posted by Mike_Deezy
It's not held on by clips, it's held on by screws. On the lip itself, there are 4 screws (I believe) protruding out of it. You then insert those screws into the holes that you drilled in your front bumper and then screw on the nuts that comes with the lip to hold it in place.
Is there any screws drilled on the bottom of the bumper, i could not feel by putting my hand below the bumper and saw that there is only 2 screws on the sides of the bumper
Please confirm , also do u happen to have a soft copy of the instruction manual , just want to know the dealer did it right
Thanks
i just installed mine today. the white adhesive tape you are talking about is probably the rubber molding on the lip itself. the bottom should have 4 clips, and there should be one screw on each side of the lip. There is also 4 bolts that go into your front bumper, with a nut and washer on the other side.
Originally Posted by heyitzalex
i just installed mine today. the white adhesive tape you are talking about is probably the rubber molding on the lip itself. the bottom should have 4 clips, and there should be one screw on each side of the lip. There is also 4 bolts that go into your front bumper, with a nut and washer on the other side.
Thread
Thread Starter
Forum
Replies
Last Post
yoyoyo8
Exterior - Body Parts
1
Aug 12, 2015 03:04 AM




