G35 Sedan V35 2003-06 Discussion about the 1st Generation V35 G35 Sedan

Chrysler 300C vs G35?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Mar 14, 2006 | 03:39 PM
  #1  
TheTrance's Avatar
Thread Starter
|
Registered User
Joined: Dec 2005
Posts: 329
Likes: 0
From: Edmonton, AB
Chrysler 300C vs G35?

2000 300C vs 2003 G35 sedan
so which one of these would you guess is faster?
 
Reply
Old Mar 14, 2006 | 03:50 PM
  #2  
vn3115's Avatar
Registered User
Joined: Aug 2005
Posts: 181
Likes: 0
From: Utah
300c in my opinion. I think the 0-60 is posted at 5.5 (340 hp and 390 tq)
 
Reply
Old Mar 14, 2006 | 03:58 PM
  #3  
pdjafari's Avatar
Registered User
iTrader: (3)
Joined: Jul 2004
Posts: 9,366
Likes: 0
From: DC/VA/MD
one of my friends 'arjunz' raced a 300C hemi...this was w/ 3-4 other witnesses from our region...he took it off the line and had the guy (guy in the 300C had his gf too). After about 70-80mph he shut down but the guy in the 300c proceeded to do the ricer fly by...
 
Reply
Old Mar 14, 2006 | 03:59 PM
  #4  
pdjafari's Avatar
Registered User
iTrader: (3)
Joined: Jul 2004
Posts: 9,366
Likes: 0
From: DC/VA/MD
more or less we were 'all' shocked.....
 
Reply
Old Mar 14, 2006 | 04:38 PM
  #5  
TheTrance's Avatar
Thread Starter
|
Registered User
Joined: Dec 2005
Posts: 329
Likes: 0
From: Edmonton, AB
well i raced one today, but only after the 3rd gear i was able to beat him by half a car (and then he gave up i think). this was a 2000 model tho so i think theyr not as good as the new ones
 

Last edited by TheTrance; Mar 14, 2006 at 04:43 PM.
Reply
Old Mar 14, 2006 | 05:05 PM
  #6  
trey.hutcheson's Avatar
Staff Alumni
Staff Alumni
iTrader: (2)
Joined: Apr 2005
Posts: 3,521
Likes: 2
From: Birmingham AL
Originally Posted by TheTrance
well i raced one today, but only after the 3rd gear i was able to beat him by half a car (and then he gave up i think). this was a 2000 model tho so i think theyr not as good as the new ones
The 2000 model Chrysler 300 was only available with the 3.5l v6, coupled with a pretty bad 4 speed auto, weighed 3580 pounds, and was FWD. That car never made any torque, but for what it was, it had mad topend. Compared to my two g's, it was a dog down low, but 2nd and 3rd gears just screamed up top. IMO, that engine sounded much better than the VQ in the upper revs.

Regardless, if you had trouble outrunning a 300M, you need to take a look at your driving.
 
Reply
Old Mar 14, 2006 | 06:26 PM
  #7  
Minarets's Avatar
Registered User
Joined: Apr 2005
Posts: 286
Likes: 0
there is no 300C from 2000.
the 300M was around up to 2005.
 
Reply
Old Mar 14, 2006 | 06:52 PM
  #8  
TheTrance's Avatar
Thread Starter
|
Registered User
Joined: Dec 2005
Posts: 329
Likes: 0
From: Edmonton, AB
i checked the back after,, it said 300C im not 100% sure about the year, i googled it to see what it looks like and it looked the same hehe
 
Reply
Old Mar 14, 2006 | 10:53 PM
  #9  
OneFast4DoorG35's Avatar
Registered User
iTrader: (2)
Joined: Aug 2005
Posts: 163
Likes: 0
From: Triad, NC
I ran an old guy and his wife in a 2005 300c Hemi from a dig and I pulled about 1/2 car on him to around 65 mph.
 
Reply
Old Mar 15, 2006 | 12:57 AM
  #10  
DaveB's Avatar
Registered User
iTrader: (9)
Joined: Aug 2003
Posts: 6,573
Likes: 72
From: Kansas City
Here's my run against a Dodge Magnum R/T 340hp Hemi with an intake (legit 10whp gain on those cars. The Magnums have the same weight/chassis as the 300C). My G can't match the launch of the Hemi, but after the first 30-40 feet, no one is pulling.

 
Reply
Old Mar 15, 2006 | 02:48 AM
  #11  
Klubbheads's Avatar
Registered User
iTrader: (10)
Joined: Oct 2003
Posts: 17,039
Likes: 14
From: LA, North Holly
Raced one today (what a coincidence) 55 to 90 had him about 1 car length.
He got a jump about half a car then i pulled a cl by 90.
I was very happy.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
netcbc
Exterior - Body Parts CDN
2
Aug 21, 2015 09:50 AM
teamghost
Brakes & Suspension
1
Jul 28, 2015 04:52 PM
VANST3R
Lights
2
Jul 27, 2015 08:20 PM
laksjd84
Exterior - Body Parts
1
Jul 24, 2015 05:12 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 03:58 AM.