G35Driver.com - The G Spot License Plate Frames
Joined: Nov 2003
Posts: 30,233
Likes: 175
From: Rothesay, New Brunswick, Canada
Originally Posted by AesonVirus
Good news everyone...
I finalized the order this morning.
I should have a final proof of the artwork to approve on Monday morning and these will then go right into production.
I was told that the production time is 4-6 weeks, but that I can expect them in less than six weeks... much closer to four.
I ended up going with the original design. There seemed to be enough interest in them to justify the design without making any modifications.
I thank everyone for their interest and for the suggestions.
BTW, I did talk to them about Plastic-Chrome, Chrome and Zinc-Plated options.
The Plastic-chrome was twice the cost and would have put them up near $10 a piece. Not too bad but production time was 16-24 weeks out, and I just didn't want to make the investment and then have this interest flame out on me.... leaving me with 500 pieces of plastic.
The Chrome and Zinc-Plated were also 16-24 weeks for production and costed anywhere from $25-$50 each. Ouch!
So, I'll keep everyone posted and we'll have these in sometime around the beginning of June.
I finalized the order this morning.
I should have a final proof of the artwork to approve on Monday morning and these will then go right into production.
I was told that the production time is 4-6 weeks, but that I can expect them in less than six weeks... much closer to four.
I ended up going with the original design. There seemed to be enough interest in them to justify the design without making any modifications.
I thank everyone for their interest and for the suggestions.
BTW, I did talk to them about Plastic-Chrome, Chrome and Zinc-Plated options.
The Plastic-chrome was twice the cost and would have put them up near $10 a piece. Not too bad but production time was 16-24 weeks out, and I just didn't want to make the investment and then have this interest flame out on me.... leaving me with 500 pieces of plastic.
The Chrome and Zinc-Plated were also 16-24 weeks for production and costed anywhere from $25-$50 each. Ouch!
So, I'll keep everyone posted and we'll have these in sometime around the beginning of June.
Originally Posted by AesonVirus
Good news everyone...
I finalized the order this morning.
I should have a final proof of the artwork to approve on Monday morning and these will then go right into production.
I was told that the production time is 4-6 weeks, but that I can expect them in less than six weeks... much closer to four.
I ended up going with the original design. There seemed to be enough interest in them to justify the design without making any modifications.
I thank everyone for their interest and for the suggestions.
BTW, I did talk to them about Plastic-Chrome, Chrome and Zinc-Plated options.
The Plastic-chrome was twice the cost and would have put them up near $10 a piece. Not too bad but production time was 16-24 weeks out, and I just didn't want to make the investment and then have this interest flame out on me.... leaving me with 500 pieces of plastic.
The Chrome and Zinc-Plated were also 16-24 weeks for production and costed anywhere from $25-$50 each. Ouch!
So, I'll keep everyone posted and we'll have these in sometime around the beginning of June.
I finalized the order this morning.
I should have a final proof of the artwork to approve on Monday morning and these will then go right into production.
I was told that the production time is 4-6 weeks, but that I can expect them in less than six weeks... much closer to four.
I ended up going with the original design. There seemed to be enough interest in them to justify the design without making any modifications.
I thank everyone for their interest and for the suggestions.
BTW, I did talk to them about Plastic-Chrome, Chrome and Zinc-Plated options.
The Plastic-chrome was twice the cost and would have put them up near $10 a piece. Not too bad but production time was 16-24 weeks out, and I just didn't want to make the investment and then have this interest flame out on me.... leaving me with 500 pieces of plastic.
The Chrome and Zinc-Plated were also 16-24 weeks for production and costed anywhere from $25-$50 each. Ouch!
So, I'll keep everyone posted and we'll have these in sometime around the beginning of June.
I have 500 of them coming so there's enough to go around.
In fact, I'll bet half of my investment ages nicely in the attic for years to come.
They're raised white letters on solid black plastic. I'll sacrifice one and see if "The G Spot" can be safely and neatly removed and I'll post pics as soon as they come in.
I'll take orders once they're ready.
In fact, I'll bet half of my investment ages nicely in the attic for years to come.
They're raised white letters on solid black plastic. I'll sacrifice one and see if "The G Spot" can be safely and neatly removed and I'll post pics as soon as they come in.
I'll take orders once they're ready.
Last edited by AesonVirus; May 2, 2008 at 11:07 PM.
Joined: Nov 2003
Posts: 30,233
Likes: 175
From: Rothesay, New Brunswick, Canada
Originally Posted by FlSHRFun
If "The G Spot" can be safely and neatly removed, count me in for two.
We're waiting for production and shipment.
Once they're ready, I'll have a paypal account set up and will work with anyone who doesn't have paypal... no worries.
We're about 4 weeks away.
Once they're ready, I'll have a paypal account set up and will work with anyone who doesn't have paypal... no worries.
We're about 4 weeks away.
