for those who don't care for OEM spoilers
 

PM me if anyone interested to do this (Chrome Delete) ...

https://g35driver.com/forums/members...9-img-4636.jpghttps://g35driver.com/forums/members...8-img-4635.jpghttps://g35driver.com/forums/members...7-img-4631.jpghttps://g35driver.com/forums/members...0-img-0103.jpghttps://g35driver.com/forums/members...8-img-0104.jpg
I can also do side mirror number (2)
https://g35driver.com/forums/members...sidemirror.jpghttps://g35driver.com/forums/members...hromepiece.jpg

I guess I can't handle that many PMs anymore haha.... here is the deal:
1) follow the instructions to remove the pieces you want to wrap
2) mail me the parts
3) I will wrap it and mail it back to you
4) the wrapping require NO CUTTING or damage your original pieces and you can always remove it with heat
(wrapping the side mirrors also mean protecting it against chips/flying rocks from driving)

about removing your chrome piece:
first tape around the lip and cover with cloths so you won't scratch anything
1) open ur trunk
2) remove all push pins that holds the lining
3) remove 4 hex nuts on the back of lip location (middle edge of the trunk)
4) there are 2 push in pins from lip to trunk each ends
(you should be able to pop out the lip now)
Do not pull too hard!!!!
there are wires for trunk switch & rearview camera
5) remove screws that holds the rearview camera & trunk switch assemble.
6) push trunk switch to slid it out
7) DONE


Please PM me for any questions and I will PM you my email if you are interested. Paypal payment is recommended
Pls understand I don't stock those materials since they are not cheap, but I will stock them if demand gets higher.
I will let you know when you should ship them to me, to minimize the time for you to get it back on to your car.

That looks good man! I think it would go well with a CF diffuser too. nice job!

Looks good. :D

DI-NOC ?

yup :icon38:

I was thinking of doing that to mine too. It looks great. Also what is DI-NOC?

fitment looks a little off. Are the gap on the sides normal?

DI-NOC - http://solutions.3m.com/wps/portal/3...s/Di-Noc-Film/

Where people usually buy them - http://www.carbonfiberfilm.com/

That looks sweet!! I would love it all black!

the blueslate looks great with the CF overlay. nicely done!

maybe it's just shadow, it is original trunk finish cover with CF overlay. I did check the gaps between trunk and the finish lip with a piece of paper, I can't get anything in between them. :)

Looks amazing. Did you just simply apply the film on the chrome lip whilst attached to the trunk or did you detach it and wrap?

I detached it and wrap, this is the only way you can get the best alignment and seal tight with no water leaking in to camera and trunk switch.

Looks very nice.

nice work!

looks good!

I plan on vinyling it.