Headlight LED Opinions pls
Joined: Mar 2011
Posts: 1,600
Likes: 67
From: Pittsburgh
Headlight LED Opinions pls
i have decided to embark on a headlight project since my original attempt was a failure 
:
so this time around i will do glossy high heat duplicolor black paint, but i also want to do LED's on the cornermarkers. i just want to know anybody's opinion on LED placement. Thanks!
Option 1:
Option 2:
Option 3:
Option 4:
^180Custom's placement
Option 5:
Option 6:
:so this time around i will do glossy high heat duplicolor black paint, but i also want to do LED's on the cornermarkers. i just want to know anybody's opinion on LED placement. Thanks!
Option 1:
Option 2:
Option 3:
Option 4:
^180Custom's placement
Option 5:
Option 6:
Last edited by GXXXV X; Sep 6, 2011 at 07:35 PM.
Registered User
Joined: May 2011
Posts: 33
Likes: 3
6 if you must. Less is more sometimes. Three LED's on those points between the turn/fog would be a nice touch and not over the top. Just my opinion. I love everything else you've been doing with the G. Keep it up.
Joined: Mar 2011
Posts: 1,600
Likes: 67
From: Pittsburgh
thanks for the input guys, i am deciding between 4, 6, or 7
7 =
7 =
Trending Topics
Registered User
Joined: Aug 2007
Posts: 24
Likes: 0
First 3 options are great. My choice is 2.
The only thing with Option 3 is that it looks half *** if it's not in a full circle.
The only problems I have with the last 4 is that you lose the touch of the car. You focus on trying to be other cars and that just questions people.
The only thing with Option 3 is that it looks half *** if it's not in a full circle.
The only problems I have with the last 4 is that you lose the touch of the car. You focus on trying to be other cars and that just questions people.
Registered User
Joined: Jun 2003
Posts: 175
Likes: 3
From: Vancouver, BC
A few ideas i had kicking around --
There are 3 nubs between the fog and the turn signal.. How about converting those to LED?
Or
similar to opt 3, but remove the fog cap, and add a matrix of leds of some sort in there?
There are 3 nubs between the fog and the turn signal.. How about converting those to LED?
Or
similar to opt 3, but remove the fog cap, and add a matrix of leds of some sort in there?
the 3 nubs there in LED would look cool. I looks they WANT to be little led lights so bad, but didn't turn into them for some reason.
I saw a local guy in our club that has a coupe, and he replaced the shroud around the projector with a colored one that had leds in it - it looks pretty cool. Not sure if you can fit a different shroud in there with that or not.
Last edited by rvanderwerf; Sep 7, 2011 at 12:19 PM.