G35Driver - Infiniti G35 & G37 Forum Discussion

G35Driver - Infiniti G35 & G37 Forum Discussion (https://g35driver.com/forums/)
-   G35 Sedan V36 2007- 08 (https://g35driver.com/forums/g35-sedan-v36-2007-08-217/)
-   -   my Windshield fluid sprayers SUCK! (https://g35driver.com/forums/g35-sedan-v36-2007-08/397361-my-windshield-fluid-sprayers-suck.html)

Austin713 01-03-2012 04:14 PM

my Windshield fluid sprayers SUCK!
 
ok so its gotten to the point where i get one of the three on the drivers side that barely hits the windshield. the rest go over or are most likely clogged. another barely hits on the passenger side. anybody have the same issues? can you replace that little nozzle or aim them??

Supremee 01-03-2012 05:02 PM

Yeah they really do. Try cleaning the wholes with a pin of something

willdogs 01-03-2012 05:13 PM

Simple fix

Get a sewing needle and carefully put the tip into eac nozzle to unclog

With the same needle, you can aim each nozzle. Just keep it in the hole and move the nozzle to point where you want it.

I havent actually tried it, but instructions are in the Car Manual and/or FSM

sdbolt 01-03-2012 05:15 PM

My dealer gave me some steel wires that they use to unclog them since I complained about it so much.

rustyeleio 01-04-2012 03:21 AM

I agree, they do suck. Easy fix as others have said though. Mine get off target again in a few months so don't lose the pin or wire.

txdave13 01-04-2012 10:32 AM

I've complained about them, too. But, there's nothing to do but clean them out.

I do wonder if the sprayers from the G37 would be a direct fit?

Austin713 01-04-2012 01:15 PM

just tried this, found a needle off one of the dress shirts i got for christmas and poked it in there :) they work great now.... i just need new wiper blades now too.

willdogs 01-04-2012 01:23 PM

For Future reference

From Car Manual:

http://img844.imageshack.us/img844/8...nozzelclog.png

Uploaded with ImageShack.us

From Factory service Manual:
http://img210.imageshack.us/img210/5...lnozzelaim.png

Uploaded with ImageShack.us

JDMPenn 01-04-2012 10:35 PM

Strange because I've had the same problem and I finally put a needle/pin in there and the left side still seems clogged or something. I'm thinking it's bad and needs replacement since this thread came up.


All times are GMT -4. The time now is 03:57 PM.


© 2024 MH Sub I, LLC dba Internet Brands